1) NATIVE model
NATIVE仿真模型
2) simulation models
仿真模型
1.
Parameter estimation new algorithms in static simulation models for urban traffic organization and optimization;
城市交通组织优化仿真模型的参数估计新方法
2.
The simulation models for axial vibration of rod string in directional wells were set up.
综合分析了复杂结构定向井井眼轨迹、杆管间摩擦力、抽油机悬点运动规律、抽油泵气体影响或供液不足的井下实际边界条件对抽油杆柱轴向振动的影响,建立了定向井抽油杆柱轴向振动仿真模型,利用该模型实现了悬点与泵示功图的自动快速仿真。
3.
Methods\ Dynamic simulation models of complex structure joints are established via equivalent simulation or equivalent replacement methods.
方法 通过当量模拟或等效置换建立复杂结构结合部动力学仿真模型 。
3) simulation model
仿真模型
1.
Review on simulation model in the research of the remaining oil;
仿真模型在剩余油研究中的应用综述
2.
Establishment of system dynamic simulation model for environment of mining area;
矿区环境系统动力学仿真模型的建立
3.
Dynamic model of oil reservoir and simulation model of remaining oil;
油藏动态模型和剩余油仿真模型
4) emulation model
仿真模型
1.
The moving curves of arbitrary 10 points and the toggle plate of moving jaw are presented in the emulation model.
通过Visual Nastran(VN)建立外动颚匀摆破碎机的仿真模型,分析破碎机的运动过程。
2.
Based on the math model of synchronous motor under the Xad per unit system, the paper constructs the emulation model of salient-pole synchronous motor by using MATLAB/SIMULINK software.
本文研究基于Xad标幺值系统下同步电动机的数学模型,采用SIMULINK软件建立凸极同步电动机的仿真模型。
3.
Based on crack face number distribution in rock mass having fractal character,a three-dimensional fractal emulation model about crack face was set up and an emulation system about crack face was developed by Visual C++6.
以岩体裂隙面数量分布具有分形特征为基础,建立了岩体裂隙面数量的三维分形分布仿真模型,并采用 VisualC++6。
5) simulating model
仿真模型
1.
On the basis of improved continuous flow equation,the mathematical model that expresses the interrelationship of the liquid pressure,the movement of plunger piston and the pump barrel clearance were setup,and simulating models of the liquid instantaneous pres.
根据改进的连续流方程,建立了泵筒内液体压力、柱塞运动规律与柱塞泵筒间隙之间相互关系的数学模型,从而建立了泵筒内液体瞬时压力与泵示功图的仿真模型。
2.
For this purpose,the experiment principle and simulating model was given.
给出了仿真模型双耳脉冲响应函数测量的实验原理及听觉化的实验结果。
3.
On the basis of the analysis of the complex combat mission,this paper discusses the frame of the ammunition requirement simulating model taking the mission completion as aim,and then builds the simulating model separately for the basic mission and the complex mission applying Petri-net and ExSpect software.
在对复杂作战任务进行分析的基础上,以任务成功性要求为目标,讨论了弹药需求量仿真的模型框架,并应用Petri网技术及其软件ExSpect建模环境,分别建立了各子任务和复杂任务的弹药需求量的仿真模型。
6) simulation
[英][,sɪmju'leɪʃn] [美]['sɪmjə'leʃən]
仿真模型
1.
Research on the Sugarcane-Soil System Simulation Model;
甘蔗—土壤系统仿真模型的研究
2.
In the simulation of the general technology of the tank el.
对坦克装车甲辆电传动系统的仿真中,采用MATLAB软件建立了动力源模型、驱动系统模型和负载模型等,通过对仿真模型的输出与实际系统输出进行比较,初步验证了系统模型的正确性,为进一步研究奠定了基础。
3.
Sufficient model validation accuracy is critical for effectively utilizing the expensive simulation devices;but such accuracy is quite frequently insufficient;we analyze the causes of insufficient accuracy and present effective measures to make it sufficiently accurate.
分析了当前系统仿真模型验证中存在的主要技术问题,指出验模不通过或结果散布大的主要原因之一是过程中存在未建模的动态过程。
补充资料:native sulfur
分子式:S
CAS号:
性质:理论含硫100%,成分纯净者极少,常含有泥质、有机质及沥青等机械混入物。斜方晶系,晶体呈菱方双锥状或厚板状,通常为粒状、块状、粉末状集合体。在常态下呈黄色、棕黄色,含杂质时呈红、绿、灰或黑色。金刚光泽,断口呈袖脂光泽。硬度1~2,密度2.05~2.08g/cm3。熔点低,易燃烧,燃烧时发青蓝色火焰并有刺鼻的硫化氢臭味。易溶于二硫化碳、四氯化碳、松节油及石油等。主要产于火山岩和沉积岩中。用于提取硫黄和制造硫酸。
CAS号:
性质:理论含硫100%,成分纯净者极少,常含有泥质、有机质及沥青等机械混入物。斜方晶系,晶体呈菱方双锥状或厚板状,通常为粒状、块状、粉末状集合体。在常态下呈黄色、棕黄色,含杂质时呈红、绿、灰或黑色。金刚光泽,断口呈袖脂光泽。硬度1~2,密度2.05~2.08g/cm3。熔点低,易燃烧,燃烧时发青蓝色火焰并有刺鼻的硫化氢臭味。易溶于二硫化碳、四氯化碳、松节油及石油等。主要产于火山岩和沉积岩中。用于提取硫黄和制造硫酸。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条