1) minimum-design
最小化设计
1.
A FPGA system minimum-design method and its implementation on the movement control object;
一种FPGA的最小化设计思想及其在运动控制对象上的实现
2) optimal design
最优化设计
1.
Under the condition of transaction cost and imperfect information on individual unrestricted emission and control cost, a phase-in emission trading program was optimal designed in which firms unaffected by the emissions can voluntarily opt-in and receive tradable permits while affected firms and opt-in firms will obtain optimal permit allocations.
在Stavins、Spulber以及Montero的研究的基础上,进一步分析交易成本的存在对于分阶段引入排污权交易的最优化设计的影响,并以此得到在存在交易成本的条件下,排污权交易市场的交易情况以及社会总效益因此所发生的变化。
2.
Aiming at six parameters(κ,γ,δ,μ,η and C_0) of the dynamic vibration absorber in deep sea,the optimal design of parameters was processed with Broyden-Flether-Goldfarb-Shanno(BFGS) method of variable metric method,penalty function method and the line-search method.
针对海洋环境下动力吸振器的6个参数(κ,γ,δ,μ,η和C0),综合运用变尺度法中的Broyden-Flether-Goldfarb-Shanno(BFGS)法、罚函数法、一维搜索法进行最优化设计,利用Matlab和Visual C++混合编程实现计算。
3.
In addition, we find the optimal design with uniform experimental design.
以稻草纤维为原料,经碱化、醚化合成了羧甲基纤维,研究了反应条件对合成羧甲基纤维的影响,运用均匀设计法找出该合成反应实验条件的最优化设计,该方法可定量地分析各影响因素对实验结果的影响,并且还具有原料廉价、操作简单、反应缓和、产物产率高等特点。
3) optimum design
最优化设计
1.
Treatment of composite foundation of CFG pile and its optimum design;
CFG桩地基处理及最优化设计
2.
In this article, its optimum design method will be discussed.
讨论多层压配组合冷挤压凹模的优化设计 ,推导了多层压配组合冷挤压凹模各层的应力和预紧力公式 ,并论证了屈服点分别在各层的内表面上 ;分别建立了在给定 1～ 3层组合凹模的外半径的条件下 ,以提高组合冷挤压凹模的承载能力为目标的最优化设计数学模型 ,以及在满足凹模的承载能力的条件下 ,以减少凹模的结构尺寸为目标的最优化设计数学模型 ;通过优化计算 ,得到了 1～ 3层组合凹模承载能力与最小凹模外半径等关系曲线。
4) Optimization design
最优化设计
1.
Secondly, following the theoretical preparation of CFG piles composite foundation is the optimization design theory.
在CFG桩复合地基设计计算理论准备充分的情况下,引入了最优化设计理论。
5) optimal design
最佳化设计
1.
First of all, the equation of shrunk interface pressure and the condition of diametrical ratio are deduced under the optimal design principle of shrunk double-layers cylinder.
首先推导了双层筒体基于最佳化设计原则的缩套界面压力的计算公式及径比条件。
2.
Based on the equation of shrunk interface pressure and the condition of diametrical ratio under the optimal design principle of shrunk-on cylinder, it is found that the diametrical ratio isn t true of the optimal design principle and the distribution of stress isn t very equality through analyzing and calculating the diametrical ratio and stress to a super high pressure cylinder.
利用缩套圆筒最佳化设计原则所确定的缩套界面压力的计算公式及径比条件,对某超高压缸的径比及应力进行了分析计算,发现其径比不符合最佳化设计原则,应力分布也很不均匀。
6) optimization
[英][,ɔptimai'zeiʃən] [美][,ɑptɪmaɪ'zeʃən]
最优化设计
1.
Genetic Algorithms and Their Applications to Aerodynamic Optimization Problems;
基因遗传算法及气动外形最优化设计
2.
According to the result of optimization, a high quality multilayer film with a low sheet resistance of 6.
为获得高质量的透明导电薄膜 ,采用计算机辅助 ,对ZAO metal ZAO多层膜系统进行最优化设计。
补充资料：最小辐亮度与最小辐照度(见核爆炸火球)
最小辐亮度与最小辐照度(见核爆炸火球)
minimum-brightness and minimum-irradiance
zuixiao fuliangdu yu zuixiaofu乙haodu最小辐亮度与最小辐照度(minimum-brightness and而nimum一irradianee)见核爆炸火球。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条