1) stress strain test
应力应变测试
1.
Applying computer technology in stress strain test teaching can make experimental efficiency higher,result more accurate and content more abundant.
将计算机技术应用到应力应变测试实验教学中,使实验效率更高、结果更精确、内容更丰富,加强了学生的实验操作技能,从而更好地对学生的实践能力进行训练。
2) stress-strain testing
应力-应变测试
3) high strain dynamic test
高应变动力测试
1.
Based on the results of limit shaft resistance and limit tip resistance obtained from high strain dynamic testing, and combining Shanghai technical standard, the revised formula to estimate the pile ultimate bearing capacity by static cone penetration test, and the correlation coefficients were derived, accordingly.
结合上海现行规范,在利用高应变动力测试获得单桩极限侧摩阻力和极限端阻力的基础上,提出静力触探估算单桩极限承载力的修正公式,并对其中的修正系数进行分析,从而获得了修正系数的统计结果。
4) strain measurement
应变测试
1.
By adopting natural excitation technique and mathematical statistics theory,a damage index is established,which is based on the strain measurement of structures under environmental excitation.
应用自然激励技术及数理统计理论,建立了基于环境激励下结构应变测试数据的损伤指标。
2.
Strain measurements and stress analysis of unit-2 reactor pressure vessel of QinShan nuclear power plant phase II were successfully performed at shop hydrostatic test with domestic technology.
依靠国内技术与设备手段,成功完成了秦山核电站二期工程(QS-II)2号机组反应堆压力容器出厂水压试验的应变测试,给出了水压试验中各测点应变的测试结果。
3.
A strain measurement system was developed based on LabVIEW,a popular workbench for Virtual Instruments to rapidly and exactly make measurement and analysis using computers.
为利用计算机系统快捷和准确地进行测试和分析,开发了1种基于虚拟仪器软件LabVIEW的应变测试系统。
5) Strain test
应变测试
1.
Taking the deep foundation pit of Jinmao Building supported by steel pipes as a practical example, the analyses on the three results such as the strain test of steel pipes, the observation deformation and crack and monitoring of displacement were made in the paper.
以成都市锦贸大厦深基坑土钉支护为实例，对土钉应变测试，地表土体变形破裂观测、位移监测三项成果进行分析、对土钉支护作用机制作了初步探讨，并提出了土钉墙的优化设计。
2.
A strain test system based on RS485 bus has been introduced for the stress monitor in the process of equipment-hoisting.
设计了一种基于RS485总线应用于设备吊装工作中应力监测的应变测试系统。
3.
The paper firstly introduces the strain test of TianJin Museum long-spanreticulated shell and makes out the structural stress response, ensuring the securityof the structural construction.
为了确保结构在施工期间的质量和安全,本文对天津博物馆大跨度双层球面网壳在屋顶施工期间进行了应变测试,得出了部分有代表性的杆件在屋顶施工过程的实际受力状况。
6) strain testing
应变测试
1.
The pile tip resistance and pile shaft resistance can be calculated by using the strain testing,which provides a good reference for the design of popularly application for the bridge approach project of Wuhan Tianxinzhou road Railway Bridge using AM bulb cast-in-place piles.
由应变测试结果推算出桩身端阻力及摩阻力,较好地为AM扩底桩在武汉天兴洲公铁两用长江大桥铁路引桥工程中的推广应用提供了设计依据。
补充资料：动态应力-应变曲线
分子式：
CAS号：
性质： 在具有强迫正弦振荡的动态试验中，让黏弹性体作稳定振动，以力对变形作图，在十个周期中的轨迹为一封闭曲线，称之为动态应力-应变曲线。动态试验的结果取决于试验条件：试样形状、形变方式、应变振幅、应变历程、频率和温度。从动态应力-应变曲线可以求得黏弹性体的许多动态力学性能，如从封闭曲线面积可以求得在一个周期内材料内部的发热量。
CAS号：
性质： 在具有强迫正弦振荡的动态试验中，让黏弹性体作稳定振动，以力对变形作图，在十个周期中的轨迹为一封闭曲线，称之为动态应力-应变曲线。动态试验的结果取决于试验条件：试样形状、形变方式、应变振幅、应变历程、频率和温度。从动态应力-应变曲线可以求得黏弹性体的许多动态力学性能，如从封闭曲线面积可以求得在一个周期内材料内部的发热量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条