1) simulation bridge method
仿真电桥法
1.
On defect of traditional nondestructive testing of BED, the simulation bridge method of testing EED is presented in the paper; it is also introduced detaily in the paper for the simulation bridge method composition, working principle and measures of raising accuracy; in the end its advantage and practicability are instructed.
本文针对传统电火工品无损检测方法——电桥法的不足之外,提出了用仿真电桥法来检测电火工品;详细介绍了仿真电桥的构成、工作原理及提高测试精度的各种措施等;最后说明了它的优越性、可行性,是测试技术中进行新偿试可借鉴的一例。
2) simulation bridge
仿真电桥
1.
Emphatically, it illustrate the design of current component circuit and simulation bridge circuit, as well as the measures of raising measurement accuracy.
介绍了基于仿真电桥的电火工品瞬态脉冲检验系统的硬件组成框图和工作原理,重点说明恒流源和仿真电桥的电路设计及提高测试精度的措施,最后介绍仿真电桥同步和调零的解决办法。
4) simulation algorithm
仿真算法
1.
The research of Matlab simulation algorithm;
直流调速系统的Matlab的仿真算法研究
2.
Based on it, a three-dimensional milled surface topography simulation algorithm is developed through dividing a workpiece into regular grids.
运用图形矩阵变换原理和矢量运算法则 ,推导出了立铣刀周铣过程中刀具切削刃上任意点相对于工件运动的轨迹方程 ,在此基础上构造出一种基于工件网格划分的三维表面形貌仿真算法 ,并给出了相应的仿真算例 。
3.
Adaptive simulation algorithm is an effective and practical method for simulating stiff system,and the key to realize this algorithm is stiffness recognisation.
在已有病态性识别方法的基础上引入模糊集合理论，构造准确性更高的识别方法，并将它用在自适应仿真算法中。
5) simulation method
仿真方法
1.
An equivalent kinematics simulation method of parallel robot;
一种等效的并联机器人运动学仿真方法
2.
On the basis of supporting system analysis of steel spiral case keeping internal water pressure during construction,the simplification and simulation methods were studied comprehensively using 3-D finite element method.
采用三维有限元技术,在分析施工过程钢蜗壳充水保压支撑的基础上对简化方法和仿真方法进行综合研究。
3.
Based on fluid network theory, the simulation method of pressure pulsation for the complex fluid transmission systems is developed.
本文基于流体网络理论 ,研究了适用于复杂流体传输系统的压力脉动仿真方法 ,利用仿真技术可综合分析模拟液压源管路系统各结构参数对管路压力脉动特性的影响 ,在分析过程中利用当量管路对泵源阻进行了液电比拟 ,使仿真结果更加符合实际情
6) Simulation method
仿真法
1.
On the basis of analysis and comparison of existing methods for solving robotic workspace,we put for-ward a new method named simulation method based on Matlab software.
在对现有的机器人工作空间求解方法对比研究的基础上,提出了一种新的基于Matlab的机器人工作空间求解方法——仿真法,利用Matlab/Simulink中的SimMechanics工具箱,根据机器人的结构进行建模,利用仿真的形式跟踪手臂末端轨迹,并记录其末端点到达的位置坐标,绘制和计算出机器人工作空间。
2.
In order to assess the flicker caused by electric arc furnace,the simulation method to assess flicker and its application in electric arc furnace power system was studied.
为了仿真评估电弧炉引起的闪变严重度,对闪变仿真法及其在电弧炉供电系统中的应用进行了研究。
补充资料：海氏电桥(见交流电桥)
海氏电桥(见交流电桥)
Hay bridge
holshl dlon侧100海氏电桥(Hay bridge)见交流电桥。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条