2) Flexible organic light emitting devices(FOLED)
柔性有机电致发光
1.
Flexible organic light emitting devices(FOLED)is bending, easy to carry, lightness and broading OLED using range greatly, compared with OLED with glass underlayment, FOLED can able to bear and impingement and may come true continuing melting drum-type production.
柔性有机电致发光显示(FOLED)具有可弯曲、重量轻、便于携带,耐冲击等优势,是OLED的一个重要发展方向。
3) blue organic light-emitting device
蓝光有机电致发光器件
4) organic light-emitting device
有机电致发光器件
1.
To study characteristics of organic light-emitting devices(OLEDs) with structures as simple as possible,double layer OLEDs are fabricated where polyethylene dioxythiophene-polystyrene sulphonate(PEDOT∶PSS) is used as hole transport layer,polyspirobifluorene(Spiro) is as electron transport and light-emitting layer,and aluminum-capped barium is as cathode.
为了研究简单结构有机电致发光器件的发光性能,采用PEDOT∶PSS作为空穴输运层,Spiro作为电子输运层和发光层,以金属Ba覆盖以金属Al作阴极,制备双层结构有机电致发光器件,得到性能稳定的蓝色发光。
2.
Aiming at improving the quantum efficiency of organic light-emitting devices(OLED),Electroluminescent devices based on usually thought ineffective triplet-emitting have become an attractive area of research in recent years.
为了提高有机电致发光器件(OLED)的量子效率,对75%的通常认为是无效激发的三线态激子的利用,成为近年来OLED研究中广受关注的课题。
3.
Green organic light-emitting devices with the structure of indium-tin-oxide (ITO)/polystyrene(PS)∶N,N’-bis-(3-naphthyl)-N,N’-biphenyl-(1,1’-biphenyl)-4,4’-diamine (NPB)/tris-(8-hydroxyquinoline)-aluminum (Alq3)/Mg∶Ag were fabricated.
制备了结构为indium-tin-oxide(ITO)/polystyrene(PS)∶N,N’-bis-(3-Naphthyl)-N,N’-biphenyl-(1,1’-biphenyl)-4,4’-diamine(NPB)/tris-(8-hydroxyquinoline)-aluminum(Alq3)/Mg∶Ag的绿光双层有机电致发光器件(OLED)。
5) organic electroluminescent device
有机电致发光器件
1.
Tetraaza macrocyclic compound, 6,12,19,25-tetramethyl-7,11:20,24-dinitrilo-dibenzo \ \ tetra-azacyclo-docosine (TMCD), was used as electron transport layer in organic electroluminescent devices.
TMCD作为电子传送材料,探讨了它在有机电致发光器件中的应用。
2.
5(TTA)3Dipy is synthesized and used as a red light-emitting material in our organic electroluminescent devices with the structure of ITO/PVK:Gd0.
5(TTA)3Dipy/PBD/Al的有机电致发光薄膜器件,得到了单色性好的红色有机电致发光器件,器件的开启电压为9 V,在16 V时达到最大亮度109 nit。
6) organic light-emitting devices
有机电致发光器件
1.
We have investigated the surface morphology of zinc-phthalocyanine(ZnPc) film and the effects of ZnPc as a buffer layer on the optical and electrical properties of organic light-emitting devices(OLEDs) in this paper.
本文研究了酞菁锌(ZnPc)薄膜的表面形貌及ZnPc薄膜作为缓冲层对有机电致发光器件(OLED s)光电特性的影响。
2.
By adjusting thickness and luminous place of the luminous DPVBi layer in the same laboratory conditions, organic light-emitting devices have been produced.
通过调整发光层DPVBi的厚度和在器件中的位置,在同一实验条件下设计了不同的器件结构,制备了有机电致发光器件,在实验中可看到DPVBi的厚度不同,器件的色度发生了改变,并且发现DPVBi在器件的不同位置,器件的发光特性也是不同的。
3.
However, there is a certain distance between the present organic light-emitting devices and the practical application,and a number of technical problems,such as the improvement of the brightness uniformity,the lifetime and the improvement of the color purity,has become the bottlenecks of OLEDs which constrained its development,so it needs urgent solutions.
有机电致发光器件(Organic light-emitting devices,简称OLEDs)因其具有发光效率高、驱动电压低、视角宽、发光颜色选择范围宽、制作工艺简单,以及易实现全色和柔性显示等特点,在大面积照明和彩色平板显示领域引起了越来越多的关注。
补充资料：场致发光材料(见电致发光材料)
场致发光材料(见电致发光材料)
electroluminescent material
见场致发光材料eleetrolumineseent material 电致发光材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条