1) nickel-copper alloy
镍铜合金
1.
Determination of silicon content in high wear-resistant nickel-copper alloy by hydrochloric acid gravimetric method
盐酸重量法测定高耐磨镍铜合金中硅含量
2.
The variation regularity of the strength and the plasticity of high silicon nickel-copper alloy NCu30-4-2-1 influenced by temperature was investigated by short-time high temperature tensile tests.
对高硅镍铜合金NCu30-4-2-1进行了短时高温拉伸实验,研究了材料的强度和塑性随温度的变化规律。
2) Ni-Cu alloy
镍铜合金
1.
Improvement of Smelting Technology for Ni-Cu Alloy;
精铸用镍铜合金熔炼工艺的改进
2.
In this paper,an invalidation analysis on this key gas-proof material(Ni-Cu alloy) is provided by using infrared reflect spectroscopy(IRS),X-ray diffraction(XRD),X-ray photoelectron spectrum(XPS),scanning electron microscopy(SEM) and electron diffraction spectrum(EDS).
行波管放大链中关键气密材料的气密性与行波管放大链的性能有密切的联系,分别用IRS、XRD、XPS、SEM和EDS等对该气密材料镍铜合金进行了一系列的失效分析,对影响其气密性的因素做了相应的探讨。
3) copper-nickel alloy
铜镍合金
1.
This paper describes a fundamental investigation of the corrosion behavior of copper-nickel alloy in cooling water environment, utilizing light optical, scanning electron microscopy and X-ray diffraction.
以某发电厂凝汽器铜镍合金(BFe30_1_1)点腐蚀失效为例,利用扫描电镜、X射线衍射,分析了在循环冷却水环境中BFe30_1_1铜镍合金发生点腐蚀的形貌和腐蚀产物的组成。
2.
By analyzing the costs,purchase times and construction condition,we adopted copper-nickel alloy and plastic coated carbon steel in piping design for a project that is in restricted time and funds;to ensure the project quality.
在海水介质管线设计中 ,通常把管线材质分为 ,铜镍合金、玻璃钢及碳钢涂塑管线。
3.
Investigates Copper-Nickel alloy layers deposited on polyester (PET) fabric by an electroless plating using sodium hypophosphite as reducer, with sweep electron microscope (SEM) and X-ray diffraction (XRD).
选用次亚磷酸钠作还原剂，用化学镀的方法制备了铜镍合金化涤纶织物。
4) Cu-Ni alloy
铜镍合金
1.
Studies on Cu-Ni alloy electroless plating using sodium hypophosphite as reductant;
次磷酸钠化学镀铜镍合金的研究
2.
Localized corrosion of Cu-Ni alloy in China marine;
铜镍合金在我国实海海域的局部腐蚀
3.
Effects of SRB (sulfate-reducing bacteria) on corrosion of Cu-Ni alloy was studied using electrochemical techniques under laboratory conditions.
利用电化学测试技术,在实验室条件下研究了硫酸盐还原菌(SRB)对铜镍合金腐蚀行为的影响。
5) Copper nickel alloy
铜镍合金
1.
Preparation and characterization of copper nickel alloy/carbon composite nanoparticles with core/shell structure
核/壳结构铜镍合金/碳复合纳米粒子制备及表征
2.
These series of copper nickel alloys were internally boronized.
在提出了内硼化的概念之后，对三种含镍量不同的铜镍合金进行了内硼化处理。
3.
The results indicated that copper alloy could not inhibit the adhesion of sulfate-reducing bacteria;the presence of sulfate-reducing bacteria caused the corrosion potentials of copper nickel alloy shift negatively and serious denickel corrosion occur.
从浸泡在海水中的铜镍合金表面分离纯化出了硫酸盐还原菌,并深入研究了其对B10及B30合金在海水中腐蚀行为的影响。
6) Ni-Cu alloy
镍-铜合金
补充资料：金镍铜合金
分子式：
CAS号：
性质： 金基含镍和铜的三元合金。在固相面以下所有的金镍铜合金均为单相固溶体，在较低温度时，大部分合金分解为二相固溶体。用感应炉氩气保护熔炼，铸锭在均匀化后冷加工成丝材或片材。用作轻负荷电接触材料及绕组材料，滑环材料。
CAS号：
性质： 金基含镍和铜的三元合金。在固相面以下所有的金镍铜合金均为单相固溶体，在较低温度时，大部分合金分解为二相固溶体。用感应炉氩气保护熔炼，铸锭在均匀化后冷加工成丝材或片材。用作轻负荷电接触材料及绕组材料，滑环材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条