1) high-pressured bolt
高压螺栓
1.
Through analyzing the possible flaw position of the high-pressured bolt,we determine to carry on non-destructive testing for the body of the high-pressured blot, according to the JB/T4730-2005 standard.
通过对高压螺栓可能产生缺陷位置的分析,根据JB/T4730-2005标准,确定对螺体进行无损检测的方法。
2) high temperature bolt
高温螺栓
1.
The test and research result of the 1Cr-1/5Mo steel showed that by means of adjusting the chemical compositions and the heat treatment parameters of the material,the high temperature bolt which meets various kinds of mechanical property targets and technical requirements could be produced.
对1Cr-1/5Mo钢进行了试验研究,结果表明,通过调整材料的化学成分和热处理参数,可以生产出满足各项力学性能指标和技术要求的高温螺栓。
2.
In the course of execution of this guideline, however, the author finds out some problems in it, which seriously affects the normal operation and the supervision work of the high temperature bolts, thus, an a.
但笔者在执行过程中发现该导则存在一些问题 ,严重影响着高温螺栓监督工作的正常进行 ,因此对发现的问题进行了分析和探讨。
3.
A new high temperature bolting steel containing boron has been developed successfully.
一种新的含Ｂ高温螺栓钢已试制成功，其力学性能与２０ＣｒｌＭｏｌＶＮｂＴｉＢ钢相当，工艺性能更好，已在３００ＭＷ机组中使用。
3) high strength bolt
高强螺栓
1.
The three-dimension nonlinear finite element analysis on the overhang plate high strength bolt link;
外伸端板高强螺栓连接三维非线性有限元分析
2.
Failure analysis of 10.9 grade high strength bolt
10.9级高强螺栓断裂失效分析
4) high-strength bolt
高强螺栓
1.
Study on the moment-rotation relationship of high-strength boltend-plate connection joints;
高强螺栓端板连接节点的弯矩—转角关系研究
2.
On the difference between the friction type connection and pressure-bearing type connection with high-strength bolts;
关于高强螺栓摩擦型连接和承压型连接区别的探讨
3.
Study on technology of exerting pretension strength on high-strength bolts in steel structures
对高强螺栓施加预拉力方法的研究
5) High-strength bolts
高强螺栓
1.
Through the comparison of the bolts design at all levels which used in flange of tubular steel pole, an idea of adopting high-strength bolts with 8.
在城网线路建设中,钢管杆得到了广泛的应用。
2.
The connection design method considering prying action in “Technical specification for high-strength bolts connection of steel structure JGJ82” of China is introduced.
分析和研究了钢结构高强螺栓受拉连接采用外伸端板或T型接头的破坏机理、杠杆力产生的原因以及杠杆力的计算理论。
3.
The following topics are involved:the various thickness of welded hollow spherical joints, the wrong operation of bolted spherical joints, the initial deflection of grid structures, the grade and material of high-strength bolts, checking computation of th.
本文探讨网架、网壳及轻钢结构的设计、施工、检验中的有关问题,主要内容包括:空心球厚簿不匀;螺栓球节点"马蹄缝"、"假拧";螺栓球网架起拱及挠度控制;高强螺栓的材料、级别、等强;混合节点;施工安装验算;钢材与杆件拼接;焊缝等级、缺陷、可焊性及化学成份;杆件旁弯,试验及加固;荷载与侧移等。
6) high strength bolts
高强螺栓
1.
9 frictional type high strength bolts were used in the joint with flanges and web spliced.
9级高强螺栓摩擦型连接,翼缘和腹板全部拼接。
2.
BY analyzing the fatigue failure modes of susponder,the fatiguefracture of the high strength bolts is a main failure mode of the suspender spocimen.
对吊点试件的破坏形式进行了分析，得出高强螺栓疲劳断裂是吊点试件的主要破坏。
补充资料：高压线走廊（高压架空线路走廊）
在计算导线最大风偏和安全距离情况下，35kV及以上高压架空电力线路两边导线向外侧延伸一定距离所形成的两条平行线之间的专用通道。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条