1) Slideway-bed
导轨-床身系统
2) the slideway of the machine tool
床身导轨
1.
The abrasion of the slideway of the machine tool and its influence on the precision of the machine tool;
机床床身导轨的磨损及其对机床精度的影响
3) guideway system
导轨系统
1.
Homogeneous transformation was used to analyze systematically the errors of a machine tool guideway system.
利用齐次变换对机床导轨系统的误差进行了系统分析,建立了导轨系统空间误差的数学模型,并利用该模型分析了车床导轨系统误差所引起的加工误差。
4) rail-roadbed system
钢轨-道床系统
5) bed and foundation'entia
床身-基础系统
6) machine tool slide guide
机床导轨
1.
The straightness error for machine tool slide guide is important constituent of geometrical error for process system,and it's numerical value relate direct to machine working accuracy of machined work.
机床导轨直线度误差是工艺系统几何误差的重要组成部分,其数值的大小直接关系到加工件的机械加工精度。
2.
The reasons causing distortion of machine tool slide guide during surface hardening was analyzed and the way to reduce distortion was offered and the good result is obtained.
对机床导轨表面淬火畸变的原因进行了分析 ,提出了控制机床导轨表面淬火畸变的措施 ,应用效果明显。
补充资料:导轨磨床
| |||||||
主要参数内容 | 国际先进 | 国内先进 | 国内一般 | 国内落后 | 评定方法及说明 | ||
(一)加工精度(mm) | 参照GB5288-84、ISO4703-1984 | ||||||
试件装夹总长度 | |||||||
1、2000mm | <0.01 | 0.01 | 0.01 | >0.01 | |||
2、2000~5000mm | <0.015 | 0.015 | 0.015 | >0.015 | |||
3、5000~8000mm | <0.02 | 0.02 | 0.02 | >0.02 | |||
4、8000mm以上 | <0.025 | 0.025 | 0.025 | >0.025 | |||
(二)自动化程度 | |||||||
数控装置 | 有 | 有 | 无 | 无 | |||
(三)噪声dB(A) | ≤80 | 80~81 | 82~83 | >83 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条