1) second order soliton
二阶孤子
1.
Under the influence of higher-order effects,the interactions between second order solitons in dispersion-shifted fibers are investigated numerically.
研究了高阶效应影响下,色散位移光纤中二阶孤子间的相互作用,分析了二阶孤子对衰变后时域波形的变化。
2.
Under the influence of third-order dispersion, the interaction of second order solitons in dispersion-shifted fibers was investigated numerically.
在色散位移光纤中,研究了三阶色散影响下同相和反相二阶孤子之间的互作用,分析了同相和反相二阶孤子对衰变后时域波形和频域频移的变化,发现三阶色散使二阶孤子分裂出一大一小两个不同振幅的基阶孤子,并彼此分离,但孤子对中心频率频移量却减小。
2) second-order soliton
二阶孤子
1.
Propagation and interaction of second-order solitons;
二阶孤子的传输和相互作用
2.
Models of periodically inhomogeneous perturbations are made reasonedly in a quasi-ideal dispersion-managed soliton system, their effects on second-order soliton propagation are investigated.
在准理想的的色散管理系统中建立了非均匀扰动模型 ,研究了它们对二阶孤子传输的影响。
3.
In this paper, the propagation of two neighboring second-order solitons in single-mode fiber is simulated numerically, and the interaction of them is investigated.
本文通过数值计算，对时域上相邻的两个二阶孤子在单模光纤中的传输行为进行了模拟，研究了它们之间的相互作用。
3) Second-order soliton pair
二阶孤子对
4) second order soliton split
二阶孤子分裂
5) high-order soliton
高阶孤子
1.
Based on the high-order nonlinear Schr dinger equation,the propagation of high-order solitons in the anomalous dispersion region of photonic crystal fibers(PCF)is numerically simulated by making use of the split-step Fourier method(SSFM).
基于高阶非线性薛定谔方程,利用分布傅里叶方法(SSFM)数值模拟了高阶孤子在光子晶体光纤反常色散区中的传输。
6) high-order solitons
高阶孤子
1.
Numerical simulation of splitting of high-order solitons in case of negative quintic nonlinearity
负五阶非线性下高阶孤子分裂的数值模拟
2.
Investigation on pulse compression of high-order solitons in optical fibers with quintic nonlinearity
五阶非线性光纤中高阶孤子的压缩特性研究
3.
This paper using the symmetrical split-step Fourier′ method simulates the pulse of high-order solitons transmission characteristic in self-steepening effect and broadening of pulse and spectrum situation.
采用对称分步傅里叶法数值模拟了高阶孤子在自陡峭效应的影响下,脉冲传输特性及脉冲和频谱展宽情况。
补充资料：二氧化双环戊二烯B阶树脂模塑料
分子式：
CAS号：
性质：又称二氧化双环戊二烯B阶树脂模塑料。以二氧化双环戊二烯B阶树脂为基料配制的能采用模塑方法成型的配混料。产品性能为：弯曲强度110MPa，冲击强度5.4kJ/m2；马丁耐热240℃；体积电阻率1.3×1016Ω·cm，介电强度24.5MV/m。由二氧化双环戊二烯B阶树脂，用石英粉等作填料，再加脱模剂配混制得。可用模塑法制成耐热、耐候制品用于军工和民用方面。
CAS号：
性质：又称二氧化双环戊二烯B阶树脂模塑料。以二氧化双环戊二烯B阶树脂为基料配制的能采用模塑方法成型的配混料。产品性能为：弯曲强度110MPa，冲击强度5.4kJ/m2；马丁耐热240℃；体积电阻率1.3×1016Ω·cm，介电强度24.5MV/m。由二氧化双环戊二烯B阶树脂，用石英粉等作填料，再加脱模剂配混制得。可用模塑法制成耐热、耐候制品用于军工和民用方面。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条