1)  graphics searching
图形搜索
2)  drawing
图形
1.
Application of the object-oriented technology in developing the WEDM drawing software;
面向对象技术在线切割加工图形软件中的应用
2.
Research and Practice of Integrating Drawing and Database;
图形数据库集成研究与实践
3.
For the CAD drawings largely used in measuring and mapping work,the method is studied for quick conversion from DLG to DEM data with VC+ OPENGL software.
针对目前测绘行业中大量应用的CAD图形进行研究,在VC+OPENGL平台下实现了从DLG到DEM数据的快速转换方法,在DEM的基础上进行三维可视化,并解决了CAD矢量数据难以处理的体积计算、坡度计算等技术难题。
3)  graph
图形
1.
The Creation of the Calculation Models of Macrocycle Molecules by Combining of the Graph and Quantum Chemistry Program;
图形软件与量化软件联合用于创建大环分子计算模型
2.
Basic graph drawing based on Windows CE;
基于Windows CE的基本图形绘制
3.
The Display of the Dynamic 3D-Simulationing-graph of Rolling-bearing Based on OpenGL;
基于OpenGL的轴承仿真三维图形动态显示系统
4)  figure
图形
1.
Rail Head Abrasion Monitoring System based on figure technology;
基于图形技术的钢轨头部磨损监测系统
5)  graphics
图形
1.
The application of electronic graphics media;
电子图形媒体在医学教学中的应用探讨
2.
Software design and realization of graphics platform in operation tickets system;
操作票系统图形平台的软件设计与实现
3.
Design and realization of expert system of graphics aided intelligent switch generation;
图形辅助智能开票专家系统的设计与实现
6)  Graphic
图形
1.
Research and Development of Graphic Automatic Programming System for NC Lathe;
图形化数控车床自动编程系统的研究与开发
2.
Study of graphic automatic NC programming system;
数控加工中图形自动编程系统研究
3.
GIS’ s graphic implementation on MapXtreme2005 and C#;
基于MapXtreme2005和C#的GIS图形实现
参考词条
补充资料:1-(3-Trifluoromethyl)trityl-1,2,4-triazole 再搜索
CAS:31251-03-3
分子式:C22H16F3N3
分子质量:379.390

中文名称: 氟三唑;1-(3-三氟甲基)三苯甲基-1,2,4-三唑;三氟苯唑

英文名称: 4-triazole, 1-(diphenyl-(3-(trifluoromethyl)phenyl)methyl)-1h-2;1-(diphenyl-(3-(trifluoromethyl)phenyl)methyl)-1h-1-2,4-triazole;4-triazole, 1-(alpha,alpha-diphenyl-m-(trifluoromethyl)benzyl)-1h-2;fluotrimazole;persulon;1-(3-Trifluoromethyl)trityl-1,2,4-triazole 再搜索

性质描述: 无色结晶固体。熔点132℃,20℃时的溶解度:水中为1.5mg/L,二氯甲烷中为40%。环已酮中为20%,甲苯中为10%,丙二醇中为50g/L。在0.1M(mol/L)氢氧化钠溶液中稳定,在0.2M硫酸中分解率为40%。

生产方法: 以间溴代三氟甲苯为起始原料,经形成格氏试剂,后与二苯酮进行亲核加成,然后用氯化铵水解,制得3-三氟甲基三苯甲醇。然后继续与浓盐酸反应生成3-三氟甲基三苯基氯代甲烷,最后以三乙胺作缚酸剂,以N,N-二甲基甲酰胺为溶剂,在氮气保护下,与1,2,4-三唑反应则得氟三唑。
(1)将镁屑4.8g和小粒碘放入反应瓶中,滴入含有间溴代三氟甲苯的无水乙醚溶液30ml(4.5g间溴代三氟甲苯溶于100ml无水乙醚中),在水浴上温热。在搅拌下缓慢滴入剩下的间溴代三氟甲苯无水乙醚溶液,加毕,回流30min后,蒸除乙醚,冷却,滴入含有二苯酮的苯液(36g二苯酮溶于150ml苯中)。滴加完后,加热回流2h,冷却,滴入含有40g氯化铵的水溶液,使产物分解,分离苯层,脱苯,脱水,减压蒸馏,收集180-184℃(0.08kPa)馏分。静置冷却,而得无色块状物,熔点50-52℃,即为3-三氟甲基三苯甲醇。
(2)将3-三氟甲基三苯甲醇32g和苯15.6g,浓盐酸22g,一起振摇,直至块状物完全溶解。然后分去苯层,经干燥,脱苯而得浅黄色油状物,即为3-三氟甲基三苯基氯代甲烷。
(3)将上述所得油状物34.6g,1,2,4-三唑7g,N,N-二甲基甲酰胺250ml和三乙胺11g,加入反应瓶中,在氮气保护下,加热至93-100℃反应3h。减压脱溶残留物用水洗涤,然后用二氯甲烷萃取。其萃取液,经干燥,蒸除二氯甲烷而得浅黄色固体。用丙酮重结晶而得氟三唑,熔点128-130℃。配制成50%可湿性粉剂,125g/L乳油。

用途: 氟三唑因含有氟原子,生物活性高,毒性降低,对黄瓜,大麦,葡萄等的白粉病的防治有特效。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。