1) dynamic power model
动态功耗模型
1.
Considering transmission line effects, a novel dynamic power model of clock networks is proposed.
针对传递时钟信号的树型互连线网,提出了一种考虑传输线效应的动态功耗模型。
2) dynamic power consumption
动态功耗
1.
A novel dynamic power consumption management(DPCM) method is proposed for the sink node of wireless sensor networks (WSN),in which the sleeping threshold of each node in sleeping status is deduced theoretically by utilizing the uniformly minimum variance unbiased estimation(UMVUE) of fixed truncated samples to obtain the parameters of idle duration that obey the Pareto distribution.
针对传统的功耗管理方法不能解决实际应用中汇聚节点能量资源有限而易成为网络瓶颈的问题,以及传统排队论的指数分布理论模型在处理无线网络业务流时无法准确描述自相似性问题,提出了一种无线传感器网络汇聚节点动态功耗管理方法。
2.
It can save more than 30% dynamic power consumption in low sample rate.
在低采样率的模式下可以减少30%的动态功耗。
3) dynamic power
动态功耗
1.
Specifically,the cluster-oriented compiler makes the register numbers in loops as continuous as possible to offer more opportunities for run-time power management,and the cluster-based run-time power manager employs a register cluster buffer to filter accesses to the register file for dynamic power saving.
在软件方面,面向寄存器簇的编译优化使循环程序段中寄存器的编号尽可能相邻;在硬件方面,采用寄存器簇缓冲器过滤对寄存器堆的访问并降低其动态功耗,采用基于寄存器簇的动态电压调节电路和门控预充电路降低存储单元和位线的泄漏功耗。
2.
In LVBS SRAM,a charge sharing technique is used to reducing bitline voltage,which makes the bitline swing decreased by 50% in write operation,so bitline dynamic power is greatly reduced.
这种SRAM采用电荷分享方法降低位线电压幅值,在写操作时使得位线电压摆幅减少了50%,从而显著降低了位线动态功耗。
3.
Based on the “amplifying” idea,simple circuits for measuring the gate delay,dynamic power,leakage power,and their variations for a 90nm process are designed.
分析了超深亚微米工艺参数波动对电路的影响;采用“放大”的思路设计了简单的用于测量超深亚微米工艺门延迟、动态功耗、静态功耗及其波动的电路,并提出了一种用于测量门延迟波动特性曲线的新型电路,该电路采用较短的反相器链可以得到超深亚微米工艺下门延迟波动特性曲线。
4) power consumption model
功耗模型
1.
Differential power analysis attack and power consumption model for cryptographic system;
密码系统差分功耗分析攻击及功耗模型
2.
A power consumption model of static CMOS gates in registers was offered.
提出了寄存器中静态CMOS门功耗模型,解释了DPA中选择函数D是如何将功耗曲线分入两个具有不同功耗特征的集合,使得由数据推断功耗和由功耗推断数据的思路更加清晰。
3.
All its theories are based upon the physical characters,power consumption models and data-dependent power consumption of CMOS logic gates which form the integrated circuits(ICs).
该方法是一种典型的功耗类型旁路攻击方式(Side Channel Attacks,SCA),其理论基础为集成电路(ICs)中基本单元CMOS逻辑门在实现加密算法时的物理特征、功耗模型及数据功耗相关特性。
5) power model
功耗模型
1.
Through the development of godson-1 microprocessor design, this paper introduces the methodology of power estimation at architecture level and circuit level, and analyses their power models.
结合龙芯1号处理器实际设计过程,介绍了处理器功耗评估的方法和功耗模型,分别对结构级、电路级功耗评估和实际芯片3种情况进行测试程序仿真。
2.
To improve the accuracy and speed in cycle-accurate power estimation,this paper uses multiple dimensional coefficients to build a Bayesian inference dynamic power model.
为改善周期精确级功耗分析的准确度和速度问题,使用多维特征参数建立贝叶斯推理的动态功耗模型。
3.
We propose a novel thermal-conscious power model for integrated circuits that can accurately predict power and temperature under voltage scaling.
提出了一种新型热感功耗模型,该模型能够准确估计出电压调整情况下的功耗和温度。
6) leakage power evaluation model
静态功耗评估模型
1.
A VSF-based leakage power evaluation model is then developed and used for evaluating and reducing the leakage power of CMOS combinational circuits.
为了解决利用晶体管级电路模拟分析CMOS电路静态功耗时模拟时间随电路规模增大迅速增加的问题,在分析晶体管堆叠效应对标准单元泄漏电流影响的基础上,定义了归一化堆叠系数和电路等效堆叠系数的概念,提出了基于电路有效堆叠系数的静态功耗评估模型。
补充资料：动态数学模型
分子式：
CAS号：
性质：数学模型的一种，是描述系统动态情况下各变量间关系的数学表达式。在表达式中的变量依赖于时间。化工对象的动态数学模型是把一个过程或环节的动态作为研究对象，并将其运动规律用常微分或偏微分方程形式来加以描述的数学模型。
CAS号：
性质：数学模型的一种，是描述系统动态情况下各变量间关系的数学表达式。在表达式中的变量依赖于时间。化工对象的动态数学模型是把一个过程或环节的动态作为研究对象，并将其运动规律用常微分或偏微分方程形式来加以描述的数学模型。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条