1) PbS thin films
PbS薄膜
1.
Through the summarization of PbS thin films in its crystal structure, preparation technologies and applications, several simple progresses including hydrothermal method, sol-gel process and hydrothermal electrochemistry technology for deposition of PbS thin film are designed and suggested.
通过对PbS薄膜的结构特征、制备方法、应用领域的综述,提出并设计了水热法、溶胶凝胶法和水热电沉积法等几种简单的制备PbS薄膜的新方法,展望了PbS薄膜的发展前景,PbS薄膜将向制备简单化、功能完善化、应用多样化的方向发展。
2.
PbS thin films were prepared on ITO substrates using a constant voltage cathodic electrodeposition method.
采用阴极恒电压法在ITO导电玻璃表面沉积了PbS薄膜,并用X-射线衍射仪(XRD)对薄膜的结构进行了表征,研究了沉积电压对薄膜的晶相组成的影响。
3.
PbS thin films were prepared on ITO substrates by using a constant voltage cathodic electrodeposition process.
采用阴极恒电压法在ITO导电玻璃表面沉积了PbS薄膜,并用X-射线衍射仪(XRD)、原子力显微镜(AFM)以及紫外/可见/近红外光谱仪对薄膜的结构和光学性能进行了表征,研究了沉积电压对薄膜的相组成、显微形貌以及光学性质的影响。
2) PbS photosensitization
PbS光敏膜
3) thin film
薄膜
1.
Effects of annealing temperature on microstructure and cohesion of ZrW_2O_8 thin films;
退火温度对ZrW_2O_8薄膜结构和结合力的影响
2.
Fabrication and low temperature sintering of GDC thin film;
氧化钆掺杂纳米氧化铈薄膜的制备与烧结性能研究
3.
Fabrication of CuS nano/micro tube thin films and CuO nano/micro crystal thin films using CuCl nanorod films as precursor;
以CuCl纳米棒薄膜为前驱体制备CuS纳米/微米管和CuO纳米/微米晶薄膜
4) membrane
[英]['membreɪn] [美]['mɛmbren]
薄膜
1.
Air filtration performance of nanofibrous membranes electrospuned with different nanofiber diameters;
电纺不同直径纳米纤维薄膜的空气过滤性能
2.
Solving the Problem of Break in Deep-drawing Work by using Plastic Membrane;
用塑料薄膜解决深拉深件的拉深破裂问题
3.
Texture feather analysis of the membrane wrinkling;
薄膜褶皱的纹理特征分析
5) film
[英][fɪlm] [美][fɪlm]
薄膜
1.
Photocatalytic Degradation of Toluene in Gas-phase Using C-TiO_2 Nano-film;
含碳纳米C-TiO_2薄膜光催化降解气相甲苯研究
2.
Al-doped ZnO thin films prepared through ion implantation;
金属铝离子注入掺杂制备氧化锌铝薄膜的研究
3.
Structure and corrosion resistance of self-assembled sulf-silane film on surface of Mg-Gd-Y-Zr alloy;
Mg-Gd-Y-Zr合金表面含硫硅烷薄膜的结构与耐蚀性能
6) films
[英][film] [美][fɪlm]
薄膜
1.
Effect of plasticizer on property of films of polymer-polyvinyl alcohol;
复配增塑剂对聚乙烯醇薄膜性能的影响
2.
Fabrication and forming mechanism of alumina nanowire films by anodizing method;
阳极氧化法制备氧化铝纳米线薄膜及其生成机理研究
3.
Thickness-dependent transport properties of La2/3Sri/3MnO3 polycrystalline films;
不同厚度的La_(2/3)Sr_(1/3)MnO_3多晶薄膜输运性质研究
补充资料：galena PbS
分子式：
CAS号：
性质：铅灰色，金属光泽，等轴晶系。晶体有立方体或立方体和八面体的聚合型两种。通常成致密的粒状、块状集合体。性脆。完全解理，顺沿解理打击时容易碎成小立方体。密度7.4～7.6g/cm3。莫氏硬度2～3。常与银、铜、砷、锑、铋、锡的硫化物矿共生。可用于制造金属铅、铅合金、密陀僧、铅丹、铅白和醋酸铅等。冶炼铅时往往可获得银、铋，有时还可得到硒等副产品。
CAS号：
性质：铅灰色，金属光泽，等轴晶系。晶体有立方体或立方体和八面体的聚合型两种。通常成致密的粒状、块状集合体。性脆。完全解理，顺沿解理打击时容易碎成小立方体。密度7.4～7.6g/cm3。莫氏硬度2～3。常与银、铜、砷、锑、铋、锡的硫化物矿共生。可用于制造金属铅、铅合金、密陀僧、铅丹、铅白和醋酸铅等。冶炼铅时往往可获得银、铋，有时还可得到硒等副产品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条