比相法,than phase,在线英语词典,英文翻译,专业英语

1) than phase

比相法

2) phase comparison

比相

This paper presents the basic principle of transmission error measuring technique,the usual measuring methods,including phase comparison method and counting process in the measurement of machine tool's transmission error are summarized.

文章介绍了传动误差测量方法的基本原理,对机床传动误差测量中常用的测量方法(比相法和计数法)进行了综述,根据传感器的选用分析了国内外主要的测量方法,阐明了传动误差测量技术的发展趋势:从模拟量向数字量方向发展,从比相式向记数式发展,从硬件电路完成主要测试工作向软件化的“虚拟仪器”方向发展,从单一测量功能仪器向多功能多用途的通用柔性系统方向发展。

The usual measuring methods, including phase comparison method and cou nting process, and the selection of transducers in the measurement of machine to ol's transmission error are summarized.

综合评述了机床传动误差测量中常用的测量方法 (比相法和计数法 )及传感器的选用 ,介绍了微机细分技术在传动误差测量系统中的应

This paper firstly points out the importance of self-tracking angle measurement equipment in the UAV telemetry & telecontrol system, and describes briefly the principles of two angle measuring systems, one with phase interferometer, and the other with single pulse (amplitude comparison and phase comparison on a single plane).

简要阐述了常用的相位干涉仪和单脉冲(单平面的比幅及比相)2种测角体制的原理,并给出了这2种测角体制的应用方案。

3) phase-comparison

比相

It adopts the phase-comparison of two zero-sequence currents to estimate the power direction which can overcome the disvantages caused by open circuit in potential element,system surge and variational load.

通过对线路单相接地故障时零序电流电压分布特点、零序功率方向元件动作的分析,提出了微机继电保护采用两零序电流比相判断零序功率方向的方法,零序方向元件不受电压元件断线、系统振荡及负荷的影响,从原理上确保了动作的可靠性。

4) full wave compare

全波比相

5) multiplex phase-comparison type

综合比相

The multiplex phase-comparison type ground and phase distance relay for double circuit lines on the same tower is studied.

首先对综合比相阻抗继电器在同杆并架双回线故障下的动作行为进行了研究,在此基础上提出一种结合综合比相继电器的选相新方法。

6) phase-compare direction-finding

比相测向

参考词条

比相器比相环节比相原理相关比相电流比相比相仪数字比相器多基线比相比相界面积有效（比）相界面积气液比相界面积微波相干比相微机细分比相比相单脉冲雷达原子耦极相互作用

补充资料：比色分析法(见紫外—可见分光光度法)

比色分析法(见紫外—可见分光光度法)

　　比色分析法见萦外一可见分光光度法。
　　

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引双频比相频域比相比相测角比相测距细分比相比相判据

1) than phase 比相法 2) phase comparison 比相 1. This paper presents the basic principle of transmission error measuring technique,the usual measuring methods,including phase comparison method and counting process in the measurement of machine tool's transmission error are summarized. 文章介绍了传动误差测量方法的基本原理,对机床传动误差测量中常用的测量方法(比相法和计数法)进行了综述,根据传感器的选用分析了国内外主要的测量方法,阐明了传动误差测量技术的发展趋势:从模拟量向数字量方向发展,从比相式向记数式发展,从硬件电路完成主要测试工作向软件化的“虚拟仪器”方向发展,从单一测量功能仪器向多功能多用途的通用柔性系统方向发展。 2. The usual measuring methods, including phase comparison method and cou nting process, and the selection of transducers in the measurement of machine to ol's transmission error are summarized. 综合评述了机床传动误差测量中常用的测量方法 (比相法和计数法 )及传感器的选用 ,介绍了微机细分技术在传动误差测量系统中的应 3. This paper firstly points out the importance of self-tracking angle measurement equipment in the UAV telemetry & telecontrol system, and describes briefly the principles of two angle measuring systems, one with phase interferometer, and the other with single pulse (amplitude comparison and phase comparison on a single plane). 简要阐述了常用的相位干涉仪和单脉冲(单平面的比幅及比相)2种测角体制的原理,并给出了这2种测角体制的应用方案。 3) phase-comparison 比相 1. It adopts the phase-comparison of two zero-sequence currents to estimate the power direction which can overcome the disvantages caused by open circuit in potential element,system surge and variational load. 通过对线路单相接地故障时零序电流电压分布特点、零序功率方向元件动作的分析,提出了微机继电保护采用两零序电流比相判断零序功率方向的方法,零序方向元件不受电压元件断线、系统振荡及负荷的影响,从原理上确保了动作的可靠性。 4) full wave compare 全波比相 5) multiplex phase-comparison type 综合比相 1. The multiplex phase-comparison type ground and phase distance relay for double circuit lines on the same tower is studied. 首先对综合比相阻抗继电器在同杆并架双回线故障下的动作行为进行了研究,在此基础上提出一种结合综合比相继电器的选相新方法。 6) phase-compare direction-finding 比相测向参考词条比相器比相环节比相原理相关比相电流比相比相仪数字比相器多基线比相比相界面积有效（比）相界面积气液比相界面积微波相干比相微机细分比相比相单脉冲雷达原子耦极相互作用补充资料：比色分析法(见紫外—可见分光光度法) 比色分析法(见紫外—可见分光光度法) 　　比色分析法见萦外一可见分光光度法。　　说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com