1)  evanescent states
消失态
1.
The evanescent states are common in the electro-magnetic environments,it s basic feature is the field strength decrease according to the exponential law from orginal position to far away.
消失态是电磁环境中的一种常见的状态,基本特征是场强自原生地向远处按指数规律下降。
2)  disappear
消失
1.
Study on the disappearance law of starch free radical which initiated by Mn~(+3);
Mn~(+3)引发的淀粉自由基的消失规律研究
2.
If the Sun disappeared,would the Earth move around the Jupiter;
假如太阳消失,地球会绕木星转动吗
3.
Whatever the fission and mixing method in the application of the planning, or the disappearing and disassembling ways in the application of the architecture, the designer s dream to create a beautiful city can be reflected.
无论是运用在规划中的裂变与混杂手法,还是运用在建筑中的消失与分解手法,均折射出设计者对于塑造美丽城市的梦想
3)  Disappearance
消失
1.
From disappearance to rediscovery——On half a century s fervor for ZHANG Ai-ling;
从“消失”到“重新发现”——评半个世纪的“张爱玲热”
2.
The results of investigation made from July 1955~April 2002 and historical data showed that since the late 1950s, the population number of magpie in Sichuan had revealed descent trend; the local disappearance phenomenon began at the 70s; in the 80s, it was a peak period of the partial extinction and the disap.
喜鹊(Picapica)曾是四川各地最常见的鸟类,但20世纪后期喜鹊却在四川的农耕区和城镇消失了,并持续至今。
3.
The paper mainly discusses the disappearance of the affix A(阿):A(阿)was an affix of the common language of the Han nationality before Yuan Dynasty.
本文主要探讨了词缀“阿”的消失问题。
4)  evaporative pattern
消失模
1.
The importance of studying shrinking of polystyrene pattern for evaporative pattern casting is pointed out in this paper.
指出了对消失模铸造用聚苯乙烯模样收缩展开研究的必要性 ,研究了可发性聚苯乙烯 (EPS)珠粒粒径、预发泡时间、预发泡珠粒熟化时间、成形蒸汽压力及模样的放置时间、贮存温度对模样收缩的影响 ,认为模样中发泡剂和水分的挥发以及应力的释放是引起模样收缩的主要原因 ,最后提出了在实际生产中为减少模样收缩应采取的措施。
5)  Lost Foam Casting
消失模
1.
Effects of Melt Blended Processing on Microstructure and Properties of AZ91 Magnesium Alloy in Lost Foam Casting;
熔体混合处理消失模铸造AZ91合金组织及性能研究
2.
Application of Lost Foam Casting to Art Casting;
消失模工艺在艺术品铸造中的应用
3.
Vermicular Graphite Cast Iron Exhaust Pipe in Lost Foam Casting;
采用消失模铸造工艺生产蠕铁排气出口管
6)  lost foam
消失模
1.
Numerical simulation of the injection of expanded beads in lost foam casting;
消失模珠粒射料充填过程的数值模拟
2.
An Eulerian-Lagrangian numerical scheme was used to model the filling process of expendable polystyrene (EPS) beads in lost foam casting.
采用欧拉-拉格朗日方法建立了消失模珠粒射料充填过程的数学模型,模型中把空气处理成连续介质,采用SIMPLE方法在欧拉网格中求解气相连续方程和动量方程;珠粒为离散颗粒,其运动遵循牛顿运动定律。
3.
This article states a common working program of complicated lost foam product development systematically, through the medium of a typical model of lost foam casting production.
通过一典型产品的消失模铸造生产工艺,系统地阐述了复杂型消失模铸造产品研发的一般性工作程序。
参考词条
补充资料:单线态-单线态能量转移
分子式:
CAS号:

性质:处于电子激发单线态的能量给体,通过激发能的转移使能量受体处于激发单线态的过程。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。