1) Critical point drying method
临界点干燥法
2) critical point drying
临界点干燥
1.
The fresh plant leaves surfaces of more than 10 species were examined with scanning electron microscope after being treated by several drying methods such as hexamethyl disilazane drying microwave critical point drying and convertional critical point in order to find out suitable drying methods for different plant materials.
本实验采用六甲基二硅胺烷干燥法，单固定（戊二醛）微波辐射临界点干燥法，单固定（戊二醛）临界点干燥法及双固定（戊二醛、锇酸）临界点干燥法，对数十种植物叶片进行了干燥处理并用扫描电镜对其观察比较。
3) critical evaporator
临界点干燥器
4) supercritical drying
超临界干燥法
1.
The preparation and characterization of superfine alumina particles were studied by sol-gel and supercritical drying method, transmission electron microscope(TEM) and BET techniques.
以硝酸铝为原料、柠檬酸作配体、聚乙二醇(PEG)水溶液作分散剂,采用溶胶凝胶以及超临界干燥法制备了氧化铝超细粒子。
2.
It was studied that the effect of supercritical drying (SCD) on the structure and activity of Mn-substituted hexaaluminate catalyst (LaMnAl 11O 19) for methane combustion.
用水热合成法制备了锰取代的六铝酸盐催化剂 ,并比较了超临界干燥法和普通烘箱干燥法对催化剂结构及甲烷燃烧反应活性的影响 。
5) supercritical drying method
超临界干燥法
1.
The highly active Fe/Mo/Al2O3 catalyst with the large specific surface area was prepared by the supercritical drying method.
采用超临界干燥法制备了活性高、比表面大的Fe/Mo/Al2O3催化剂。
6) Supercritical drying
超临界干燥
1.
Novel technology of supercritical drying for nano-porous materials;
纳米多孔材料的超临界干燥新技术
2.
Use of anhydrous ethanol as solvent to prepare nano A1_2O_3 by a supercritical drying method;
乙醇为溶剂超临界干燥法制备纳米Al_2O_3
3.
Using incipient impregnation,sol-gel method and conventional drying,and sol-gel and supercritical drying techniques,three kinds of 20% Ni/Al2O3 catalysts have been prepared,the catalyst samples were characterized by means of BET,XRD,H2-TPR and H2-TPD.
采用浸渍法、溶胶-凝胶过程与普通干燥、超临界干燥过程相结合的方法制备了三种20%的NiO-Al2O3体系催化剂,利用BET、XRD、H2-TPR、H2-TPD等方法对各催化剂样品物化性质进行了表征,并考察了催化剂在流化床反应器中CH4-CO2重整反应的催化性能。
补充资料：临界点干燥法
分子式：
CAS号：
性质：扫描电镜样品的一种处理方法。某些样品(如生物样品)因其表面附有黏液或体内的水分等，用扫描电镜观察前需进行干燥处理。普通干燥方法常因试样受到液体表面张力影响而变形，影响观测结果㈠临界点干燥法则将试样与碳酸混合，放于加压容器中加热，在31℃，0.73MPa的临界点时，碳酸逐渐放出CO2而使样品得以干燥又不改变样品表面形貌。
CAS号：
性质：扫描电镜样品的一种处理方法。某些样品(如生物样品)因其表面附有黏液或体内的水分等，用扫描电镜观察前需进行干燥处理。普通干燥方法常因试样受到液体表面张力影响而变形，影响观测结果㈠临界点干燥法则将试样与碳酸混合，放于加压容器中加热，在31℃，0.73MPa的临界点时，碳酸逐渐放出CO2而使样品得以干燥又不改变样品表面形貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条