1) spraying valve
喷雾阀
1.
A spraying valve by which the pipeline pressure is applicable to control the insert air automatically is designed.
对拖拉机悬挂式喷雾器产生滴漏的原因进行了试验分析,根据流体力学二相流理论提出了在喷雾器的输液管路中加入高压空气解决滴漏问题的新方法,设计出可利用管路压力自动控制加气的喷雾阀。
2) spraying
喷雾
1.
Technology transform of Shanjiaoshu Coal Mine fully-mechanized coal winning face unit face spraying and dust fall;
山脚树煤矿综采工作面喷雾降尘技术改造
2.
The Improvement upon Auto-spraying Device for the Full Light Fog Cuttage;
全光雾插自动喷雾装置的改进
3.
The development of inverting power supply for plasma charge spraying;
等离子体荷电喷雾逆变电源的研究
3) fuel spray
喷雾
1.
Research into effect of initial situation and fuel spray on cylinder flow;
初始条件及喷雾对柴油机缸内流动影响研究
2.
Flow field and fuel spray of the two designs were measured by Phase Doppler Analysis (PDA).
对有两种头部的燃烧室进行了冷态流场的数值模拟,用粒子动态分析仪(PDA)测量了两种头部的速度场和喷雾场,结合慢车工况的贫油熄火试验结果进行了分析。
4) Spray
喷雾
1.
Experimental investigation on granulation conditions for production of granular calcium dihydrogen phosphate by spray process in a fluidized bed;
流化床喷雾制备磷酸二氢钙成粒条件的实验研究
2.
Modelling of submicron particle agglomeration in spray process from coal combustion;
燃煤超细颗粒物喷雾团聚的模型
5) spraying property of sprayer
喷雾机喷雾性能
6) Electrospray ionization
电喷雾源
参考词条
补充资料:溢流阀、顺序阀、减压阀的比较
溢流阀 | 减压阀 | 顺序阀 | ||
控制油路的特点 | 通过调整弹簧的压力控制进油路的压力,保证进口压力恒定,p2=0 | 通过调整弹簧的压力控制出油口的压力,保证出口压力p2稳定 | 直控式-通过调定调压弹簧的压力控制进油路压力;夜控式-由单独油路控制压力 | |
出油口情况 | 出油口与油箱相连 | 出油口与减压回路相连 | 出油口与工作回路相连 | |
泄漏形式 | 内泄式 | 外泄式 | 内泄式 | |
进油口状态及压力值 | 常态 | 常闭(原始状态) | 常开(原始状态) | 常闭(原始状态) |
工作状态 | 进出油口相通,进油口压力为调整压力 | 进油口压力低于出油口压力,出油口压力稳定在调定值上 | 进出油口相通,进油口压力允许继续升高 | |
联接方式 | 并联 | 串联 | 实现顺序动作式串联作卸荷阀用时并联 | |
功用 | 定压、溢流或安全作用限压、稳压、保压 | 减压、稳压 | 不控制系统的压力,只利用系统的压力变化控制油路的通断 | |
进油腔压力p1控制阀芯移动 | 出油腔压力p2控制阀芯移动 | 进油腔压力p1控制阀芯移动 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。