1) Compress deformation
挤压形变
3) extrusion deformation
挤压变形
1.
A nickel sulfate bath was used to prepare electroless nickel coatings on magnesium before and after extrusion deformation.
用硫酸盐镀镍溶液对挤压变形前后的金属镁进行化学镀镍,并用动电位法研究了镀层在3。
2.
The element proportion of Al and Zn was adjusted in AZ91 magnesium alloys, which were made into magnesium alloys ingot via traditional melting technique, afterwards became samples by extrusion deformation.
调整AZ91镁合金中Al和Zn元素的成分,采用传统的熔炼工艺制成镁合金铸锭,再经过挤压变形制成试样。
3.
Effects of extrusion deformation on microstructure and properties of AZ31 Mg alloy are studied by using 500T extruder.
采用 50 0 T挤压机试验研究了挤压变形对 AZ3 1镁合金组织和性能的影响。
4) press deformation
挤压变形
1.
FEM of one way press deformation on casing;
套管单向挤压变形的有限元仿真
2.
FEM of two way press deformation on casing;
套管双向挤压变形的有限元仿真分析
5) Compression deformation
挤压变形
1.
The results shown that some grooves appear around the bearing hole because of compression deformation during the cutting process.
结果表明机械加工轴承孔时,由于加工刀具的原因使轴承孔加工表面受到挤压变形留下沟槽,在酸洗过程中,沟槽处出现微小裂纹,在周期载荷作用下,裂纹扩展直至断裂。
2.
So the surface borehole rock strata interlayer slippage deformation and rock stratum compression deformation rule was found and this was in great use of the fracture mechanism and protection measure.
为了获得地面钻井变形破坏的直观规律,本文通过构建相似模拟平面模型,对采场覆岩移动进行了相似模拟,并通过设置竖向位移监测线模拟钻井的变形规律,通过应力-应变传感器监测覆岩层应力分布情况,从而获得了地面钻井层间滑移变形和层内挤压变形的直观规律,为地面钻井变形破坏机理的研究和防护措施的制定奠定了基础。
6) Hot extrusion deformation
热挤压变形
1.
Effect of hot extrusion deformation on microstructure and mechanical properties of sub-micro Al_2O_(3p)/Al composite;
热挤压变形对亚微米Al_2O_(3p)/Al复合材料组织性能的影响
补充资料：冲击挤压(见冷挤压)
冲击挤压(见冷挤压)
impact extrusion
ehongji jiya冲击挤压(impaet extrusion)见冷挤压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条