1) phosphorus content
含磷率
1.
Results showed that phosphorus content and phosphorus accumulation in rice plant sampled at different growth stages increased significantly under FACE treatment, but significant decreased in phosphorus use efficiency for biomass production (PUEp), phosphorus use efficiency for grain output (PUEg) and phosphorus harvest in.
结果表明:FACE处理后,水稻不同生育时期植株的含磷率(除移栽后28d外)和磷累积量显著提高;增加施氮量,抽穗期磷累积量显著提高。
2) phosphorus content in sludge
污泥含磷率
3) phospours-containing
含磷
1.
Curing kinetics of phospours-containing epoxy resin;
含磷阻燃环氧树脂的固化动力学研究
4) abundant phosphorus
富含磷
5) rephosphorized steel
含磷钢
1.
015% titanium microalloying on the microstructure and properties of rephosphorized steel sheet were investigated by analyzing its microstructure and properties as hot-rolled and as annealed as well as its recrystallization dynamic behavior during annealing under different coiling temperatures(600,650 and 700 ℃ separately).
以低碳含磷钢为研究对象,通过分析不同卷取温度时(分别为600、650和700℃)热轧态和冷轧退火态的显微组织和力学性能以及退火再结晶动力学行为,研究了微钛(0。
2.
Effects of coiling temperature(600、650 and 700 ℃,respectively) on the microstructures and mechanical properties of micro-alloyed rephosphorized steel sheet were investigated by analyzing its microstructures and mechanical properties in as hot-rolled and as annealed conditions as well as its recrystallization dynamic behaviors during annealing.
以低碳微合金化含磷钢为研究对象,通过分析热轧态和冷轧退火态的显微组织和力学性能以及退火再结晶动力学行为,研究了卷取温度(6006、507、00℃)对微合金化含磷钢组织和性能的影响。
6) phosphorus wastewater
含磷废水
1.
The paper discusses the treatment of phosphorus wastewater by experiments and proposes a way of decreasing P by slaked lime and phosphate crystallization method.
文章对含磷废水的处理技术进行了实验研究,提出石灰乳脱磷与磷酸盐结晶法处理工艺。
2.
The removal of P from phosphorus wastewater with calcinated or uncalcinated red mud were investigated.
研究了赤泥投加量、反应时间、pH值和搅拌速度对含磷废水去除效果的影响,探讨了赤泥煅烧活化前后对废水中磷的去除作用。
参考词条
补充资料：含磷钢
分子式：
CAS号：
性质： 含有一定量磷的钢。钢中的磷由于使液相线与固相线温度范围加大，易形成严重偏析。磷是固溶强化铁素体元素，能显著提高钢的抗拉强度，也能提高钢的耐蚀性。但却增加钢的脆性，尤其是显著降低钢的低温韧性，称为冷脆。磷也增加钢对回火脆性的敏感性。利用磷的有利作用发展了含磷低合金钢和轻轨用钢轨；利用磷可改善钢的被切削加工性，发展了含磷易切削钢。
CAS号：
性质： 含有一定量磷的钢。钢中的磷由于使液相线与固相线温度范围加大，易形成严重偏析。磷是固溶强化铁素体元素，能显著提高钢的抗拉强度，也能提高钢的耐蚀性。但却增加钢的脆性，尤其是显著降低钢的低温韧性，称为冷脆。磷也增加钢对回火脆性的敏感性。利用磷的有利作用发展了含磷低合金钢和轻轨用钢轨；利用磷可改善钢的被切削加工性，发展了含磷易切削钢。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。