1) Double tip pruning
二次打顶
2) Secondary ejection
二次顶出
1.
According to structure characteristics and problems in the existing mold of the plug base, analyzed the mold structure, as well as secondary ejection structure by tension plate pendulum block was established, in addition, solved the problems of internal surface of the plug base becoming dark and out surface having burr.
针对某型插头基座的结构特点和现有模具存在的问题,对模具结构进行了分析论证,确立了拉板摆块二次顶出结构,解决了插头基座孔内表面发黑和外形表面有毛刺的问题。
2.
Taking relay cover as an example, introduced a new secondary ejection mold which was more simple and could be controlled preciously.
以继电器外壳为例,介绍了一种新型的二次顶出机构,该机构比较简化,又具有行程可精确控制的特点,同时对该二次顶出机构的设计及工作过程进行了简要介绍。
3.
A new latch-style secondary ejection mechanism is illustrated.
列举实例介绍一种新型的"扣机式"二次顶出机构。
3) second ejection
二次顶出
1.
The demoulding structure of automatic thread demoulding and second ejection with compressed air are adopted.
对带内螺纹的塑料制品及其模具结构进行分析,采用自动卸螺纹和压缩空气二次顶出相结合的结构较紧凑的脱模机构。
2.
Another characteristic of the mould is the ejector mechanism used second ejection, which solved the stroke problem of the core-pulling insert in the ejection.
该模具另一特点是顶出机构中使用二次顶出 ,解决了顶出时抽芯镶块的行程问题。
4) two_time ejection
二次顶出
1.
And the mechanisms of forced demoulding, two_time ejection and delayed ejection by a sliding core used in the injection mould were introduced.
分析了沐浴露瓶盖的工艺特点 ,介绍了瓶盖注射模的结构及工作过程 ,并介绍了注射模设计中采用的强制脱模、二次顶出、滑动型芯延时顶出机构等。
5) two_step ejection
二次顶出
1.
The device is usually used to resetting prior to ejection, two_step ejection, ejection mechanism of the fixed half of the mould and two_step mould opening mechanism.
介绍了一种塑料模具动作顺序控制装置的结构 ,该装置主要用于顶出先复位、二次顶出、定模顶出机构及二次开模机构
补充资料：输出反馈(见线性二次型次优控制)
输出反馈(见线性二次型次优控制)
output feedback
3h日c卜口fon以以{输出反馈型次优控制。(output王eedbaek)见线性二次
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条