1) seed-filling process
充种过程
1.
Using the air vertical-rotor seed-metering device as the investigation object, the filling process of the precision seed-metering device in rice bud-sowing via High Speed Video Camera System (HSVCS) technique was studied, and the speed and pressure in the seed-filling process of rice bud-sowing through ANSYS software were simulated.
以气吸式垂直圆盘排种器为研究对象,利用高速摄像技术,研究了精播水稻芽种排种器的充填过程,采用ANSYS软件对水稻芽种在充种过程中的速度场和压力场进行了模拟,并进行了排种性能试验研究。
2) filling process
充模过程
1.
Numerical simulation on the filling process of water-assisted injection molding;
水辅助注射成型充模过程的数值模拟研究
3) filling process
充型过程
1.
Numerical simulation of inclusion movement in mold filling process of metal melt;
金属液充型过程中夹杂物运动的数值模拟
2.
Study of the factors affecting filling process of grinding ball by vertical centrifugal casting;
立式离心铸造磨球充型过程的影响因素研究
3.
Numerical simulation and experimental verification of the initial temperature distribution of castings during mold filling process;
铸造充型过程初始温度场的数值模拟及实验研究
4) mold filling process
充型过程
1.
Development and application of numerical simulation for the mold filling process of casting;
铸造充型过程数值模拟的研究进展及应用
2.
Numerical Simulation of Mold Filling Process for Wax Pattern in Investment Casting;
熔模精密铸造蜡模充型过程的数值模拟
3.
Numerical simulation equations were established for the mold filling process of liquid metal with turbulent or laminar flows and for the process of liquid metal being solidified and cooled into the casting.
建立了铸件充型过程中金属液流体湍流和层流流动及凝固冷却时三维速度场和温度场数值模拟的计算方程 ;介绍了这些方程的数值求解 ,相关边界条件及凝固潜热处理方法 ;以此为基础 ,编制了三维计算、前处理、后处理程序及相关数据库 ,形成了SRIFCAST软件。
5) Filling
[英]['fɪlɪŋ] [美]['fɪlɪŋ]
充型过程
1.
Magnetic Field Distribution in the Traveling Magnetic Field Generator for Electromagnetic Casting and Its Influences on the Filling Process;
金属熔体在行波磁场铸造充型过程中受到6个力的作用,这6个力共同作用的结果使熔体充型过程中速度的变化存在加速、匀速、减速的变化规律,解释了与此相对应的铸造缺陷如冷隔、浇不足等形成的原因,并提出了两种改变磁场分布的方法。
6) filling stage
充填过程
1.
The influences of gas channel layout on the gas-assisted co-injection molding(GACIM) process are investigated by CAE technology based upon the governing equations of the filling stage of GACIM process.
基于气体辅助共注射成型充填过程的控制方程,采用CAE方法研究了气道布局对气体辅助共注射成型工艺的影响。
2.
Numerical simulation of the filling stage of thin cavity injection molding is carried out with viscoelastic fluid model to discover the effect of viscoelastic properties of polymer on the quality of injection molding parts.
为反映聚合物粘弹属性对注塑产品质量的影响,基于粘弹本构模型,对三维薄壁制件的注射成型充填过程进行了数值模拟研究。
补充资料：充炭黑充油丁苯橡胶
分子式：
分子量：
CAS号：
性质：同时含有炭黑和油的丁苯橡胶。性能和用途与充炭黑丁苯橡胶和充油丁苯橡胶相似。由冷聚丁苯胶乳与炭黑的水分散液和油乳液经混合、凝聚、洗涤、过滤、干燥等步骤制得。
分子量：
CAS号：
性质：同时含有炭黑和油的丁苯橡胶。性能和用途与充炭黑丁苯橡胶和充油丁苯橡胶相似。由冷聚丁苯胶乳与炭黑的水分散液和油乳液经混合、凝聚、洗涤、过滤、干燥等步骤制得。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条