1) Crystal iron
结晶态铁
2) dynamic recrystallization of ferrite
铁素体动态再结晶
1.
The effect of initial grain size and hot deformation parameter Z on dynamic recrystallization of ferrite is approached.
采用Gleeble1500型热模拟试验机进行单轴热压缩实验,研究了4种不同原始晶粒尺寸的低碳钢在变形温度为700和600℃,应变速率为10~1—10~(-3)s~(-1)条件下的变形特性及组织演变规律,探讨了原始晶粒尺寸和热加工参数Z值对铁素体动态再结晶过程的影响。
3) crystal amorphous state
结晶非晶态
1.
Aim To investigate the multiple melting behavior of polyamide 6(PA 6) in polyamide 6/linear low density polyethylene blends crystallized from the crystal amorphous state.
目的研究热处理条件对尼龙６及其在线性低密度聚乙烯共混物中的结晶非晶态样品的结晶熔融行为。
4) crystalline morphology
结晶形态
1.
Effects of Nucleator on Crystalline Morphology and Mechanical Properties of Polypropylene;
成核剂对聚丙烯结晶形态和力学性能的影响
2.
Isothermal crystalline morphology of isotactic polypropylene (iPP) with clarifying nucleator - TM-3 was observed by polarized light microscope.
利用偏光显微镜观察了等规聚丙烯(iPP)在透明成核剂TM-3作用下的等温结晶形态,并与普通成核剂苯甲酸钠的影响作了对比。
3.
Their crystalline morphology was characterized by using polarizing light microscopy,which were contrast to HDPE/elastomer blends.
通过DSC分析仪和偏光显微镜研究了共混物的熔融、结晶行为和结晶形态,并将其结晶形态与简单共混对照样加以对比研究。
5) morphology
[英][mɔ:'fɔlədʒi] [美][mɔr'fɑlədʒɪ]
结晶形态
1.
in order to understand the toughness mechanism of HDPE/HAP composite prepared by in situ biomineralization,the crystallization kinetics and morphology of HDPE/HAP composite were investigated.
研究了原位矿化复合方法对HDPE/HAP复合材料中HDPE的结晶形态及结晶动力学的影响,结果表明,原位矿化复合方法制备的复合材料中HDPE主要以放射状伸直晶形式存在,HDPE晶粒细小,结晶度高,且HAP与HDPE界面结合紧密。
2.
The morphology of the.
用示差扫描量热法(DSC)研究了蒙脱土对聚丙烯及马来酸酐接枝聚丙烯的非等温结晶行为的影响;用偏光显微镜(POM)观察了聚丙烯及共混体系的结晶形态,估算了径向生长速率。
3.
Research on Self-nucleation of Copolymer Polypropylene and the Crystallization Kinetics and Morphology of High Impact Polypropylene Copolymer;
高抗冲聚丙烯(HIPP)与等规聚丙烯(iPP)结晶动力学、结晶形态进行研究发现,HIPP的结晶温度和熔融温度均低于iPP,等温结晶动力学表明,HIPP与iPP相比较,半结晶时间要长,结晶活化能和端表面自由能也要高。
6) Crystallization morphology
结晶形态
1.
The crystallization morphology of PCL in the blends can be changed with the crystallization temperature and the NC content obviously.
聚己内酯结晶形态随结晶温度和共混物组成的变化表明 ,在共混体系中聚己内酯结晶速率与非晶第二组分的扩散速率存在一定的匹配关系 ,是影响环带球晶形成的重要因
2.
The crystallization morphology and isothermal crystallization process were studied by means of polarized microscope and DLI(Depolarized Light Intensity) for poly(ether ester) block copolymers.
采用偏光显微镜和光学解偏结晶速率仪研究了嵌段聚醚酯共聚物的结晶形态和等温结晶过程。
补充资料：钨铁电炉出铁(吉林铁合金厂)
钨铁电炉出铁(吉林铁合金厂)
吻 他排由帕中桩了士朴屏人乙曰“
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条