1)  Bridge position
桥梁位置
2)  bridge
桥梁
1.
Consideration after the collision incidents involving ships against bridges in the Shaoxing area;
对绍兴辖区船舶触损桥梁事故的思考
2.
The application of overall safety management in the construction of bridge;
全面安全管理在桥梁施工中的应用
3.
The reasonable utility of the bridge drilling waste slag;
论桥梁钻孔废渣的合理利用
3)  Bridges
桥梁
1.
Vibration Suppression Characteristics of Multiple Tuned Mass Damper with Its Application to Buffeting Control of Bridges;
多重调质阻尼器制振性能及对桥梁抖振的控制
2.
Seismic fragility analytical methodology for reinforced concrete bridges;
钢筋混凝土桥梁地震易损性分析方法
3.
RC Bridges Dynamic Finite Element Model Updating;
钢筋混凝土桥梁结构动力有限元模型修正
4)  bridge beam
桥梁
1.
Discussion on durability and controlling measures of concrete bridge beam;
浅谈混凝土桥梁的耐久性及控制措施
2.
Discussion on the application of integral no expansion joint bridge beam;
整体式无伸缩缝桥梁的应用浅析
3.
The article discusses the relative relation of the rigidity, strength and bridge pier earthquake and the application of the earthquake isolation design on the bridge beam through the analysis and study of the bridge anti-drop-beam device, and puts forward the design idea of "two-level" sheeting.
该文通过对桥梁防落梁装置的分析研究,讨论了防落梁装置的刚度、强度和桥墩地震相应的关系,及在隔震设计的桥梁上的应用,并提出了“两水准”挡块的设计思想。
5)  highway bridge
桥梁
1.
The cause of highway bridges early corrosion disease and analysis study in advance;
公路桥梁早期锈蚀病害的起因及分析研究
2.
The cause of highway bridges damagement and how to detect and reinforce the highway bridges in advance;
浅谈公路桥梁病害的起因、检测与加固
3.
Structural retrofit and rehabilitation with Carbon Fiber Reinforced Plastic(CFRP) is a very hot strengthening technique which has a great market in highway bridges,but it is still in unformed phase.
碳纤维复合材料(CFRP)加固是当前最为引人关注且具有广泛应用前景的桥梁加固技术,但仍处于研究阶段。
6)  "bridge"
“桥梁”
1.
It will make great difference to take guards as the "bridge", that is, to develop guard service trade and give full play to guards.
大力发展保安服务业,积极构建有关机制,挖掘保安的治安作用,利用保安这个“桥梁”,可能会使问题别有一番景象。
参考词条
补充资料:Pro/Engineer Drawing 工程图自动安排尺寸位置
命令Detail-tools-clean dims 用来让系统自动安排尺寸的位置的命令,使用它,我们可以完成如下内容:

使尺寸在尺寸线之间自动居中,包括含有形位公差的尺寸 
根据模型的一个边、考面,轴线等,使所有尺寸在所选对象的一侧。 
按照试图视图或按照单独的尺寸安排尺寸位置 
自动翻转箭头方向 
使尺寸偏离边界或视图界限一定距离。 
选择菜单: DETAIL > Tools > Clean Dims, 或点击工具条按钮 : 出现clean dimensions对话框。选择尺寸确定后,对话框如下: 

placement标签:可以设置  偏移距离(offset)  
尺寸间位置增量:increment  
设置偏移参考:视图界限/基准线。  
是否建立引导线。  
cosmetic标签  翻转箭头  
使文字居中  
 
点击Apply应用。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。