1) fuel film evaporation
油膜蒸发
1.
A test bed for investigating the process of fuel film evaporation on the wall of combustion chamber was developed.
研制出一套用于研究柴油机燃烧室壁上油膜蒸发过程的模拟试验装置。
2) evaporation and emulsification of oil
油膜蒸发和乳化
3) Falling Film Evaporation
降膜蒸发
1.
Theoretical Study on Characteristics of Falling Film Evaporation Hydrodynamics and Heat Transfer in a Vertical Wavy Wall Tube;
波形竖管降膜蒸发流动与传热性能的理论研究
2.
A model of falling film evaporation of binary mixture on the inside wall of a vertical tube and corresponding numerical Solution are presented.
提出了二元混合物在垂直圆管中降膜蒸发的传热传质耦合数学模型及其相应的数值解法 。
4) falling-film evaporation
降膜蒸发
1.
Optimization design for three-effect counter-current falling-film evaporation process of Bert rams and the problems should pay attention to in daily operation were introduced.
介绍了对Bertrams公司三效逆流降膜蒸发生产工艺在操作方面的优化及日常运行需要注意的问题。
5) Thin-Film Evaporation
薄膜蒸发
1.
Separation technology of thin-film evaporation of tolylene diisocyanate monomer;
甲苯二异氰酸酯单体的薄膜蒸发分离工艺
2.
With the action of blades' wiping,thin-film evaporation method is characterized by short residence time,low evaporation temper- ature and ability to deal with high viscous pre-polymer,and suitable for monomer's separation.
因刮板刮动物料作用,薄膜蒸发法具有停留时间短、蒸发温度低及能处理高黏性预聚物物料等特点,是较好的单体分离方法。
3.
The free toluene diisocyanate(TDI) in the curing agent TDI-TMP(Trimethylol Propane) of polyurethane was separated in laboratory by means of high-vacuum two-stage thin-film evaporation.
在采用高真空两级薄膜蒸发分离甲苯二异氰酸酯(TDI)-三羟甲基丙烷(TMP)聚氨酯固化剂中游离TDI的实验研究基础上,进行了中试研究。
6) thin-film Evaporator
薄膜蒸发
1.
In order to distil free TDI from the PU curing agent with thin-film Evaporator,a suitable curing agent should be a small molecular weight and reacted thoroughly.
提出了要想在薄膜蒸发器中分离出TDI,得到合格的聚氨酯固化剂产品,需要从合成固化剂入手,相对分子质量小、反应完全的聚氨酯固化剂更适合在薄膜蒸发器中进行分离,研究探讨了聚氨酯合成工艺。
2.
VE liposome was prepared by thin-film evaporator and high pressure homogenization method.
采用薄膜蒸发-高压均质法制备维生素E(VE)脂质体,研究了VE脂质体配方中不同成分的比例及水合介质对脂质体包封率的影响。
3.
Firstly, the working principle of the thin-film evaporator and the related auxiliary equipment were introduced.
本课题将薄膜蒸发工艺引入食用菌多糖的生产,重点研究薄膜蒸发成套的控制系统,这对于提高食用菌多糖生产的自动化水平有着重大的意义。
补充资料:油膜轴承油
分子式:
分子量:
CAS号:
性质:为抗氧防锈型润滑油。具有良好的粘温性能、抗氧化性、防锈性及抗泡沫性等。目前最重要为21号油膜轴承油,适用于轧钢机的动压、静压、动静压油膜轴承,也可用于低速、重负荷大型机械的滑动轴承。以原油经过常减压蒸馏、丙烷脱沥青、深度溶剂精制、溶剂脱蜡及补充精制所得润滑组分,再加入抗氧、防锈、抗泡沫添加剂调制而成。
分子量:
CAS号:
性质:为抗氧防锈型润滑油。具有良好的粘温性能、抗氧化性、防锈性及抗泡沫性等。目前最重要为21号油膜轴承油,适用于轧钢机的动压、静压、动静压油膜轴承,也可用于低速、重负荷大型机械的滑动轴承。以原油经过常减压蒸馏、丙烷脱沥青、深度溶剂精制、溶剂脱蜡及补充精制所得润滑组分,再加入抗氧、防锈、抗泡沫添加剂调制而成。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条