1) Thermal Entrance Effect
温度入口效应
1.
Thermal Entrance Effect in the Lubrication Clearance of a Screw Extruder;
螺杆挤出机润滑间隙内温度入口效应
2) entrance effect
入口效应
1.
Studied are the effects of particle-diameter, Renault number, entrance effect, and height of the active carbon bed to the average flow resistance coefficient.
入口效应仅在低Re数、床层总阻力较小时对床层平均阻力系数影响较大。
2.
In the paper,it is proposed that entrance effect is a key contributor that causes these different or contradictory in microscale.
文中提出入口效应以及充分发展段的流动特性与常规尺度的差异可能是影响微尺度下气体流动特性的关键因素。
3) Inlet Temperature
入口温度
1.
Three-dimensional Finite Element Model (FEM) Analysis of the Roller's Shape with an Uneven Inlet Temperature Field in Continuous Roll-casting Process;
非均匀入口温度场下铸轧辊辊型的三维有限元仿真
2.
Propellant inlet temperature control for cryogenic rocket engine tests
低温发动机试验推进剂入口温度控制
3.
The influence of fluid component content and inlet temperature on the flow in gas condensate pipeline-riser system
流体组分含量及入口温度对天然气凝析液输送管道立管系统流体流动特性的影响
4) temperature effects
温度效应
1.
Better understanding of the thermomechanical behaviour of the materials subjected to temperature effects is a key issue for the analysis of this kind of applications.
对与温度效应有关的材料的热–力学特征的正确理解是分析该类工程问题的一个关键。
2.
Some problems are studied in detail, including the thermal consolidation problem, the temperature effects on permeability, thermal conductivity and thermal resistivity, thermal volume change of the clay-water system, etc.
分析了温度效应对粘性土介质若干基本力学特性的影响。
3.
Th effect of ADC error on system performance is discussed from four aspect as following:DC characteristic,error source,temperature effects and AC characteristic,and some rectifying measurements are also put forword.
本文主要从直流特性、误差源、温度效应及交流特性等方面 ,详细讨论了ADC误差对系统性能的影响 ,并提出了部分校正措施。
5) effect of temperature
温度效应
1.
The basic mechanical properties,reinforcement and failure mechanisms,effect of temperature,the length of fiber and the influence of the fraction of components and surface treatment o.
简要介绍了纤维增强泡沫塑料的制备方法和结构形态;重点报道了短纤维增强泡沫塑料力学行为的研究成果和作者的一些工作,其中包括纤维增强泡沫塑料拉压、弯剪基本力学性能、纤维增强机理和材料破坏机理、温度效应、纤维长度、纤维填充量和表面处理对力学行为的影响等。
2.
This paper deals with the relation between the young spike differentiation of dif-ferent ecotypes of wheat at different sowing date and the effect of temperature.
研究了不同生态型小麦在春季分期播种条件下的幼穗分化过程与温度效应的关系。
3.
The effect of temperature on the polarizing prisms;
从理论上对棱镜透射比以及透射光强扰动的温度效应进行了讨论。
6) temperature effect
温度效应
1.
Sunlight temperature effect analysis and design research of the prismatic continuous box beam;
等截面连续箱梁日照温度效应分析及设计研究
2.
Analysis of temperature effect for long span pre-stressed concrete box girder of continuous and rigid frame bridge;
大跨连续刚构预应力混凝土箱梁温度效应分析
3.
The study of temperature effect for long span tall-pier T-shape rigid frame bridge;
大跨度高墩T构桥温度效应研究
补充资料：入口效应校正
分子式：
CAS号：
性质：毛细管流变仪实验数据需要加上的一个校正。主要考虑毛细管入口处的黏性和弹性效应。如果考虑了这个校正，毛细管的表面长度需要加eR，其中R为毛细管的半径，e可从实验求得。
CAS号：
性质：毛细管流变仪实验数据需要加上的一个校正。主要考虑毛细管入口处的黏性和弹性效应。如果考虑了这个校正，毛细管的表面长度需要加eR，其中R为毛细管的半径，e可从实验求得。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条