1) initial velocity of particle
粉粒初始速度
2) initial particle velocity
初始颗粒速度
3) initial velocity
初始速度
1.
The effects of number and size of elements in the contact area in the steady stage of a rolling process as well as the initial velocity of the plate on the finite element analysis were analyzed and reasonable simulation parameters in a rolling process with FEM were attained, which was used to analyze the rolling force regularity of medium plat rolling in one steel work.
分析了轧制过程稳定阶段接触区中厚板单元数、轧辊单元尺寸以及中厚板初始速度选择对有限元分析计算结果的影响, 得出了合理的轧制过程有限元模拟参数, 并对某中厚板厂15道次轧制过程轧制力变化规律进行了分析, 稳定阶段轧制力计算结果与实测结果非常接近。
2.
The program indicates that the initial velocity is a variable.
根据Bridgman 法生长HgCdTe 晶体过程中溶质CdTe 的分布规律,推导了缩短初始过渡区长度、增加组分稳定区长度的最佳初速度表达式,从式中可看出:初始速度为一变数。
3.
Resorting to Runge-kutta method to solve the simply supported axial pre-statically loaded bar s buckling impulse under the half-sin impact load, this paper is to probe into the relationship between buckling impulse, and pre-static load, impact load, initial deflection, initial velocity respectively.
运用龙格 -库塔方法求解两端简支的轴向预静载杆在半正弦冲击载荷作用下的屈曲载荷 ,分析屈曲载荷与静预载 ,冲击载荷 ,初始几何缺陷 ,初始速度之间的关
4) initial velocity field
初始速度场
1.
The initial velocity field is more close to the last velocit.
在保证计算精度的情况下,以减少迭代步数和提高计算效率为目标,提出基于工程法和细分单元法设定初始速度场。
5) initial acceleration
初始加速度
1.
The effect of pressure differences on the initial acceleration of flow,the mean axial velocity component w_m,the flow rate q,the distance of reattachment point z and so on have been discussed.
讨论了压力差的变化对流体初始加速度、平均轴速分量wm、流量q和再附着点距离Z等的影响,给出了在压力差变化的情况下wm、q、Z和时间的关系曲线。
6) Particle velocity
粉粒速度
1.
Theoretical calcalation of particle velocity in gas-particle flow through inclined long duct with constant section;
倾斜等直径长管中气粉两相流粉粒速度的理论计算
补充资料:"球粒"硅微粉
“球粒”硅微粉在国内罕见。矿产资源研究所掌握全国范围内的矿产资源和先进的矿产品加工技术,选用高品质石英原矿,经独特工艺加工而成的一种高强度、高硬度、惰性的球型颗粒,其主要成-分sio2含量99.6%以上,密度为2.65,莫氏硬度为7,细度在325目至5000目之间,白度在70-94之间, 具有合理可控的粒度范围,外观为白色粉末状。
经电镜分析,硅微粉颗粒形态为近等轴状六角多面体形,被称为“球形”颗粒。
硅微粉主要由微晶质石英组成,sio2含量大于99.50%, 硅微粉中有害元素含量极低,均低于检出极限。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条