1) oil cooler
油冷器
1.
Effect of different tubes on the heat transfer and flow resistance performance of oil cooler with coronal fin tubes supported by helical baffles was studied in this paper.
油冷器广泛应用于各类化工过程及机械加工过程中。
2.
The mechanisms of pitting corrosion of 5454 aluminum-magnesium alloy tube bundle of oil cooler in cooling water was studied.
对 5 45 4铝镁合金材质的油冷器芯子在循环水介质中发生点蚀的机理进行了研究 ,根据拟定的防护措施进行了模拟试验和防护设计 ,采用镁合金阳极配合涂层对所有冷却器实施阴极保护 ,设备使用寿命由 4年提高到 12年以上 ,取得了良好的效果。
3.
Heat transfer enhancement of three types of tubular oil cooler ,transversally finned tube bundle supported with segmental baffles, petal - form fin tube bundle supported with segmental baffles and with nests constructed with wave form long holes has been experimentally investigated.
近年来,螺纹翅片管已在工业油冷器中应用,因其肋化系数可达2。
2) liquid-cooled oil cooler
液冷冷油器
3) oil cooler
油冷却器
1.
A study of heat transfer property of low-fin-tube oil cooler with helical baffle;
螺旋隔板低肋管机油冷却器的传热特性研究
2.
The comparable experimental investigation on the fouling characteristics of normal tube and twisted tubes in oil cooler was carried out.
对螺旋扁管与普通直管在油冷却器中的污垢特性进行了对比实验研究。
3.
By testing,the structure of main parts of the modular cooling device was determined,and its key part,a new oil cooler,was developed.
通过计算分析,提出了高速动力分散式电力动车组模块化冷却装置的总体方案;通过试验研究,确定了模块化冷却装置主要零部件的结构型式;成功研制出模块化冷却装置的关键部件——一种全新结构的油冷却器。
4) oil cooler
冷油器
1.
The spiral sheet thermosiphon heavy oil cooler is a new type of heat exchanger which can control the wall temperature as heatpipes do with the same working principle to avoid the problem of forming sticky insulating layer on the cold wall and deteriorating the cooling effect with an ordinary oil cooler.
它克服了普通间壁式冷油器因壁面温度低而形成粘油绝热层，冷却效果差的缺点，又比热管式换热器的结构更适合于容积流量较小的液液热交换场合。
2.
So renovation had been applied to improve heat exchanging efficiency of oil cooler and temperature of its discharge oil was decreased.
大唐国际陡河发电厂近年由于冷却水温升高,冷油器发生堵管和结垢,不能满足机组润滑油系统的换热要求。
3.
A measure to calculate super heat conduction oil cooler in Excel 2002 is presented.
提出了一种运用Excel 2002计算超导冷油器结构的方法,研究了在超导冷油器设计计算中超导管各几何参数对冷油器结构的影响,在改变各种参数后可立刻得到计算结果,方便快捷,且结果具有较强的说明力和可信度。
5) oil-cooler
油冷却器
1.
For petal-shaped fin tube oil-cooler with helical baffle s, as the oil pressure drop in shell side is 90 kPa , the overall heat transfer coefficient of oil_cooler is 3200 W/(m2·K)， which is 15% higher than that of low fin tube oil-cooler with helical baffles, and is 5 times as large as that of smooth tube oil-cooler with segmental baffles, so it is an efficient oil-cooler.
对于螺旋隔板花瓣管润滑油冷却器， 当壳程油侧压降为90 kPa时， 其总传热系数可达3200 W/（m2·K）， 比螺旋隔板低肋管油冷却器高15%以上， 为普通弓形隔板光滑管油冷却器的5倍左右， 因而它是目前国内外传热效能最高的水冷壳管式油冷却器。
6) oil-cooler
冷油器
1.
Frequent copper tube leakage had occurred in oil-cooler of steam turbines during operation period from Feburary,2004 to June,2006 at Yuelong Power Generation Co Ltd.
粤泷发电有限责任公司自2004年2月投产到2006年6月期间汽轮机冷油器铜管发生了多次泄漏。
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条