1) Speed characteristics and governing characteristics
速度特性-调速特性
2) governing characteristics
调速特性
1.
Testing and study of governing characteristics of steam turbine-driven feed-water pump for 300 MW generating unit;
300MW机组汽动给水泵组调速特性试验研究
2.
The objective of this research is to develop a diesel engine governing characteristics model for the hardware-in-the-loop (HIL) simulation study of tractor system.
为拖拉机动力传动系统硬件在环(HIL)仿真研究建立柴油发动机调速特性数学模型,用于控制电机使其产生与柴油机调速特性尽可能匹配的转速-转矩特性。
3.
A test bench on which the governing characteristics,carrying capacity,pulley diameters,and transmission efficiency of CVTs can be tested is developed.
基于对橡胶带式无级变速器(CVT)基本结构和调速原理的分析,开发了一套对带式CVT调速特性、承载能力、传动效率等进行测试的试验台,主要实现对输入输出转矩和转速的测量以及对移动盘轴向位移的提取。
3) governing characteristic
调速特性
1.
The flyweight s parameters such as volume and moment of inertia etc, which have most effect on governing characteristic were accurately calculated by three dimension solid modeling, and on the basis of this, the mathematical models for the lift of flyweight and the movement of governor were built in a meticulous way.
:介绍了 R80 1新一代全程机械式调速器的主要结构特点和工作原理 ,运用三维实体造型的手段精确计算了对调速特性有重要影响的飞锤体积、惯性矩等参数 ,并在此基础上建立了飞锤升程模型和调速机构运动模型 。
4) characteristic velocity
特性速度
1.
Experimental results of this work show that characteristic velocity has two regions with different characteristics.
在内径 φ90的搅拌萃取塔中 ,对分散相特性速度进行了研究。
2.
This approach is based on the characteristic velocity and can be used for the design of SMR packed extraction column with low and medium interfacial tension systems,which can also be applied for the design of industrial plant.
在系统实验研究的基础上，选择基于特性速度的方法，得出用于中低界面张力体系的ＱＨ－１扁环填料萃取塔的液泛速度计算公式，可用于工业装置的设计计算。
5) speed characteristic
速度特性
1.
In order to improve the uniformity of asphalt flow in screw distributor,the speed characteristics of as- phalt concrete flow are analyzed using theoretical mechanics and hydromechanics.
为使沥青混合料流在布料槽中形成不完整螺旋流,改善其均匀性,运用理论力学和流体力学的基本概念,对沥青混合料粒料在摊铺机布料槽中运动的速度特性进行了分析,提出了在布料槽中形成理想混合料流,螺旋布料器所应具备的结构和转速,以及充盈参数等技术条件。
2.
In this paper the working course is divided into two states and the speed characteristics of wheel under different states is discussed.
本文采用了按过程分段分析方法 ,讨论不同状态下工作轮的速度特性 ,解释了该种轮工作时的宏观现象 ,文中结论可用于指导冲击压路机设计和制定施工工
3.
Taking the four-wheel-driven cold milling machine as the research target, the speed characteristic of driving hydraulic system of cold milling machine is analyzed, and the driving speed characteristic equation is built.
本文以四轮驱动的冷铣刨机为研究对象,对冷铣刨机行走驱动液压系统的速度特性进行了分析,建立了冷铣刨机行走速度特性方程。
6) velocity characteristic
速度特性
1.
Study on the model of the velocity characteristics for dual-fuel engine.;
双燃料发动机速度特性数学模型的研究
2.
According to the analysis of piston movement,the important velocity characteristic has been achieved.
根据对活塞运动的分析,得出气动伺服系统重要的速度特性。
补充资料：3D特性
翻译为：AlphaBlending(α混合) 简单地说这是一种让3D物件产生透明感的技术。屏幕上显示的3D物件，每个像素中有红、绿、蓝三组数值。若3D环境中允许像素能拥有一组α值，我们就称它拥有一个α通道。α值的内容，是记载像素的透明度。这样一来使得每一个物件都可以拥有不同的透明程度。比如说，玻璃会拥有很高的透明度，而一块木头可能就没什么透明度可言。α混合这个功能，就是处理两个物件在萤幕画面上叠加的时候，还会将α值列入考虑，使其呈现接近真实物件的效果。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条