1)  isoparametric
等参形式
1.
Based on the concept of the finite dynamic element method, a 2-dimensional isoparametric finite dynamic element is developed and then used to analyze the ditch conduit-soil dynamic interaction in this papar.
利用动态有限单元法建立和推导二维等参形式四边形动态有限单元,研究了沟埋式管与土的动力相互作用,求得管周土体的静、动应力分布。
2)  isoparametric
等参
1.
Remark on isoparametric minimal hypersurfaces of S~(n+1);
关于S~(n+1)中极小等参超曲面的注记
3)  isoparametric element
等参元
1.
Concise and efficient four node multi variable conforming isoparametric element;
简明有效的四结点多变量协调等参元
2.
Based upon the Hellinger-Reissner(H-R) mixed variational principle for the piezoelectric material,the Hamiltonian isoparametric element of the piezoelectric material is derived.
根据压电材料修正后的Hellinger-Re issner变分原理,推导了压电材料的Ham ilton ian等参元。
3.
The application of three-dimensional high-order isoparametric element in finite element analysis was introduced simply.
介绍了高次等参元退化单元常见型式及其在有限元分析中的应用,具体讨论了节点退化和形状退化情况下单元节点插值形函数的构造和修改,研究了混合单元的有限元求解流程,并编写了相关的求解程序,通过具体算例比较了混合单元与全六面体等参元网格的计算情况,结果表明三维高次等参单元及其退化单元的混合应用不仅可以适应较为复杂的空间实体计算网格,而且还能满足精度上的要求,具有重要的工程意义。
4)  isoparametric transformation
等参变换
1.
By means of an isoparametric transformation,the stiffness matrix and the effective nodeforces of the parallelogram element are calcnlatel.
本文通过等参变换推导了平行四边形单元的刚度矩阵及等效节点力的表达形式,计算表明它们均为显式积分,等效节点力可通过静力等效原则得到。
2.
The quadrature formula about surface integral on any quadrilateral element is deduced by means of isoparametric transformation and bilinear interpolation.
通过对三维有界区域的边界曲面作四边形网格剖分,用有限元方法处理高斯公式中的曲面积分,由等参变换及双线性插值导出任意四边形单元上曲面积分的数值求积公式。
3.
An approximation format of tetrahedral isoparametric element for solving the 3-dimensional 2-order Dirichlet problem is presented in this paper first,then based on the optical estima- tion of isoparametric transformation,we prove the convergence of the format given,obtain the optical H~1 estimate error.
基于对等参变换的细致估计,证明了格式的收敛性,并得到了H~1-误差的最优估计。
5)  isoparametric element
等参单元
1.
Study of degeneration models of isoparametric element in finite element method;
有限元等参单元退化模式研究
2.
The paper taked 20 nodes isoparametric element as an example and put forward a kind of numerical method combined with the Newton iterative algorithm and Gauss integral algorithm to calculate equivalent loads of prestress in body element.
本文以20节点等参单元为例,提出一种运用高斯积分和牛顿迭代法的数值算法计算实体单元的预应力等代荷载,该方法能够适应各种复杂的预应力钢束形状,并适合计算机编程。
3.
Using 8-nodes isoparametric element based on Mindlin plate theory and Newmark method,the dynamic responses of both thin and thick elastic plates resting on Winkler foundation subjected to moving load are analyzed.
采用基于Mindlin板理论的8节点等参单元和Newmark逐步积分法,对Winkler地基上的弹性薄板和厚板在移动荷载作用下的动力响应进行了分析,并与已有的薄板有限条法分析结果进行了对比。
6)  isoparametric elements
等参单元
1.
In this dissertation,the principle of FEM in EM was discussed,then a three-layered pavement were analyzed with 4-noded isoparametric elements.
系统阐述了电磁场有限单元法的基本原理,然后采用四节点等参单元分别对三层路面系统进行了静态场和时变场的有限元分析,初步建立了路用探地雷达GPR电磁波在三层路面中传播的正演模型,同实测波形相比,模拟效果较好,并用Fortran90语言编制了相应的三维、二维有限元程序,具有较好的可读性和可移植性。
2.
In this paper, isoparametric elements of twenty nodes are used to calculate the body of Pulse Radar, and a 3-D FEM program was compiled.
采用二十节点等参单元对Pulse雷达实体进行有限元计算,用fotran语言编制了相应的三维有限元程序,根据系统识别原理建立了电磁波在Pulse雷达天线中全反射传播的正演模型,同时域有限差分法、时频域的FFT变换法相比,此结果更为精确、有效,便于工程应用。
参考词条
补充资料:内部形式与外部形式
      标示形式自身相互区别的一对哲学范畴,即表现事物内容的两种不同的方式。内部形式是内容的内在组织结构,内容诸要素间的本质联系;外部形式是内容的外在的非本质的联系方式,是使不同内容的事物相互区别的外部形态、外部表现。内部形式和内容不可分割,和内容一起表现着事物的本质方面,其发展变化直接影响着内容的发展变化。它包含在内容自身之中,在一定意义上是内容的组成部分、因素和环节,和内容是直接统一的。外部形式同事物的现象相联系,是内容的外观,它以外在的表现形式对内容发生影响。外部形式同内容的联系不具有内部形式那样的内在性、直接性,它和内容不是直接统一的。
  
  内部形式和外部形式的区分对于文学艺术具有重要意义。文学艺术内容的内部结构性、组织性,形象联系的合理性、协调性和完整性等,直接表现着文学艺术作品的思想主题,它们是和文学艺术内容直接统一的内部形式。在此意义上,内部形式也就是内容的组成部分。文学艺术作品的内容又要通过物质材料,通过文学艺术思想的物化形态表现出来,以供观赏。物质材料等文学艺术思想的物化形态,构成文学艺术的外部形式。对于文学艺术来说,其外部形式具有重要的作用。事物的外部形式具有不同的层次,其中,有些同事物的内容存在着一定联系,有些则同事物的内容并不直接相关。
  
  唯物辩证法首先重视事物的内部形式,认为内部形式和内容一起共同表现着事物的本质,它对于理解和把握事物的发展具有重要意义。与此同时,也注意事物的外部形式,认为它是影响事物发展的一个因素。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。