1)  ultrashort light pulse
短脉冲光源
2)  ultra-short pulse source
超短脉冲光源
3)  short pulse
短脉
1.
This paper presents the theory and clinical significance of long and short pulses in traditional Chinese medicine.
探讨中医学长短脉的诸家学说及长短脉的临床意义,认为长短脉具有重要的研究价值。
2.
Through detecting and analyzing the materials of the pulses which tested by the doctors and the pulse apparatus,we presented the thoughts and methods of quantitative research on long and short pulses in traditional Chinese medicine and got the detective methods and criteria of them.
通过医生盲法切脉与脉象仪测脉结果的对比分析,统计分析了医生切脉时指感为无脉搏搏动时的界限定量指标,并以此为依据初步建立了一套长短脉客观量化研究的方法,确定了判断中医长短脉的阈值范围。
4)  ultra-short pulse
超短脉冲
1.
The Ultra-short Pulse Evolution Characteristic in Self-similar Parabolic Pulse Fiber Amplifier;
自相似抛物脉冲光纤放大器中超短脉冲的演化特性
2.
Development of optically pumped semiconductor(CPS) vertical-external-cavity surface-emitting lasers(VECSEL) in generating ultra-short pulse;
产生超短脉冲的光泵浦垂直外腔面发射激光器的研究进展
3.
This paper mentions the transmission features of the ultra-short pulsed-laser and monochromatic laser while they arc respectively passing through the circular or serrated apertures shaping system, but also presents their application in high energy laser system.
报道了超短脉冲激光和单色激光分别通过锯齿光阑或圆孔先阑整形系统的传输特性及其在高能激光系统中的应用。
5)  long and short pulses
长短脉
1.
This paper presents the theory and clinical significance of long and short pulses in traditional Chinese medicine.
探讨中医学长短脉的诸家学说及长短脉的临床意义,认为长短脉具有重要的研究价值。
6)  laser pulse shortening
短脉冲化
参考词条
补充资料:超短脉冲激光频率转换材料


超短脉冲激光频率转换材料
materials for ultrashort pulses laser frequency conversion

  超短脉冲激光频率转换材料materials forultrashort Pulses laser frequeney eonversion用于脉冲宽度从微微秒直到几十毫微微秒激光的频率转换材料。超短脉冲激光具有短的脉宽,较好的模式特性以及高的峰值功率,从而具有很强的非线性性能。经频率转换后,短波的超短脉冲可产生强的光化学反应,是探索微观世界和超高速现象的极为有用的光源。此外,采用薄片倍频材料的超短脉冲倍频,可以作为超短脉冲脉宽测量的一种简便有效的方法,在技术上有实用价值。 对超短脉冲激光频率转换材料的性能主要有以下要求:①高的光损伤闭值。由于超短脉冲的高峰值功率,因而对材料的光损伤阑值提出高的要求,一般要大于GW/cmZ。②相位匹配特性。超短脉冲在空间的尺度短到毫米及几百微米量级,短脉冲波包在材料中以群速度传播。因而,除一般的相速度匹配外,还应满足群速度匹配才能获得较高的能量转换效率。对光学均匀材料,要求基频和倍频波的折射率色散小,才能获得较好的群速度匹配。对I类匹配,群速度要求稍低;对n类匹配要求太苛刻,很难应用。由于群速度失配存在,一般器件只取亚毫米的厚度。过长的光程于能量转换无补,反而引入脉宽的展宽以及能量的损耗。③透过波段。首先要求对参与频率转换的激光波长有高的透过率。对超短脉冲应用场合,材料应有更短的紫外吸收边。其原因是吸收边会增加材料的折射率色散;远离使用波长的吸收边,可使材料获得较好的群速度匹配。 钱激光超短脉冲频率转换的常用材料是磷酸二氢钾(KDP)类晶体。此外,新开发的三硼酸锉(LBO)晶体,由于其高的抗光损伤阑值、好的紫外透过率以及小的色散,也是好的超短脉冲频率转换用材料。有机晶体精氨酸磷酸盐(LAP)和氛化精氨酸磷酸盐(D一LAP)也可用作超短脉冲频率转换用材料。 (邵宗书)
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。