2) varying parameter vibration drilling
变参数振动钻削
1.
A novel method of step multi element varying parameter vibration drilling was proposed for micro hole machining of laminated composite materials.
针对叠层复合材料的微小孔加工 ,提出了阶跃式多元变参数振动钻削新方法 。
3) oscillation parameter
振动参数
1.
This paper compared continuous casting mold oscillation types between nonsinusoidal oscillation and triangle oscillation, analyzes their oscillation waves and oscillation parameters.
本文对非正弦振动和三角形振动这两种不同的连铸结晶器振动方式进行比较，分析二者振动波形及振动参数，确定适合高速连铸的振动参数的选择范围，选出最佳的振动形式。
2.
This paper establishes the velocity equations of new trapezoid oscillation, analyzes its oscillation parameters, and proposes its optimum regions.
本文建立了新梯形振动的速度表达式，并对其振动参数进行了分析，确定其最佳选择范围。
4) vibration parameter
振动参数
1.
Design of PVDF sensor measuring vibration parameters;
测量多振动参数的PVDF传感器的设计
2.
An L27(313)orthogonal array based on Taguchi method was adopted,the results showed the effects of the dynamic injection molding parameters on shrinkage of parts were different between perpendicular flow direction and parallel flow direction,and the effects of vibration parameters on the sh.
文中采用L27(313)正交矩阵进行实验,试验结果表明:动态注塑参数对制品的垂直于流动方向与平行于流动方向收缩的影响是不同的,振动参数对两个方向上收缩率的影响都较强,说明振动力场的引入能使聚合物加工过程发生变化。
3.
Through drawing and analyzing the cutting trace of the slice lapping,the selection of appropriate vibration parameters is mainly discussed in order to achieve the best slice lapping e.
通过分析和绘制研磨的切削轨迹,着重讨论如何确定合适的振动参数,以达到最佳的研磨效果。
5) Vibration parameters
振动参数
1.
Research on effects of vibration parameters on stainless steel cutting by diamond tool;
振动参数对金刚石切削不锈钢零件影响规律研究
2.
Helical vibration dryer and design of its vibration parameters;
螺旋振动干燥机及其振动参数设计
3.
The vibration parameters of the fiberboard, including specific dynamic Young's modules E/ρ,acoustic radiation damping (E/ρ3)~(1/2) , acoustic impedance (Eρ)~(1/2) ,(E/ρ)~(1/2) and Eccc, are measured by flexural vibration.
利用弯曲振动法测取了纤维板的比动态弹性模量E/P、声辐射阻尼系数(E/P3)~(1/2)、声阻(Eρ)~(1/2)及(E/ρ)~(1/2)、Eρ等振动参数,并利用回归方法分析了这些参数与静曲强度的相关性。
6) Parametric vibration
参数振动
1.
Intelligent control of parametric vibration of stayed cables with MR dampers induced by simple harmonic support motions;
磁流变阻尼器对支座简谐运动下拉索参数振动的智能控制
2.
Passive control for parametric vibration of cables using viscous fluid dampers;
黏滞阻尼器对拉索参数振动的控制分析
3.
Finite element analysis of parametric vibration of radial gate;
弧形闸门参数振动的有限元分析
补充资料：变分参数法
变分参数法
[ variatkm - parametric method
变分参数法Ivar‘‘犯·Para心tric砚t坛对;BaP“a”Ifo-““0一n叩aMeTp“，ecKH盆MeTO及J 关于由把圆盘E={::}:!
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条