1) liquid cylinder
流体圆柱
1.
A comparision between the solid cylinder which is surrounded by the elastic isotopy stratum and the acoustic waves filed which is stimulated by a point source in the liquid cylinder is made in the paper.
对各向同性弹性固体地层包围的固体圆柱和流体圆柱中点源激发的声波场进行了对比，理论证明了固体圆柱中场方程可严格过渡到流体圆柱中场方程。
4) cylinder
[英]['sɪlɪndə(r)] [美]['sɪlɪndɚ]
柱;圆柱体
5) flow around a circular cylinder
圆柱绕流
1.
Experimental research on the flow characteristics and vortex shedding in the flow around a circular cylinder;
圆柱绕流的流场特性及涡脱落规律研究
2.
Simulation of vortex induced vibration of turbulent flow around a circular cylinder by plane turbulent models;
圆柱绕流涡致振动的平面湍流数值模拟
3.
In order to test the accuracy and resolution of complex vortex by particle image veloci- metry(PIV) ,velocity fields of poisoeulie flow and flow around a circular cylinder were measured.
为了考察粒子图像速度场仪 (PIV )的测量精度及分辨复杂流动结构的能力 ,对泊肃叶流动和圆柱绕流两种典型流动进行了测量 。
6) circular cylinder
圆柱绕流
1.
Numerical simulation on suppression of vortex shedding around the circular cylinder with O-rings;
利用O型环抑制圆柱绕流涡脱落的数值研究
2.
Two dimensional particle image velocimetry system is used to investigate effects of the dielectric barrier discharge plasma on the flow field in the wake of circular cylinder cross flow.
利用二维粒子图像测速系统研究了低速风洞实验中介质阻挡放电等离子体对圆柱绕流尾迹区流场的影响。
3.
A uniform viscous and incompressible flow around a circular cylinder was numerically simulated.
利用计算流体力学软件 CFX- 4,对粘性不可压缩流体的圆柱绕流进行了三维数值模拟 ,采用有限体积法和 SIMPLE计算程式 ,利用不可压缩 Navier- Stokes方程 ,模拟雷诺数在亚临界区内的绕流流动 ,并计算了流体的水动力特性 。
补充资料：55°圆柱管螺纹的型式和尺寸
| 螺纹代号 | 基本尺寸 | 大径 mm d=D | 螺距 mm p | 每英寸牙数 tpi | 中径 mm d2=D2 | 小径 外螺纹 d3 | 牙型高度 H1 | 底孔尺寸 mm | |
| G 1/8 | 1/8＂ | 9.728 | 0.907 | 28 | 9.147 | 8.566 | 0.581 | 8.7 | |
| G 1/4 | 1/4＂ | 13.157 | 1.337 | 19 | 12.301 | 11.445 | 0.856 | 11.6 | |
| G 3/8 | 3/8＂ | 16.662 | 1.337 | 19 | 15.806 | 14.95 | 0.856 | 15 | |
| G 1/2 | 1/2＂ | 20.955 | 1.814 | 14 | 19.793 | 18.631 | 1.162 | 19 | |
| G 5/8 | 5/8＂ | 22.911 | 1.814 | 14 | 21.749 | 20.587 | 1.162 | 20.75 | |
| G 3/4 | 3/4＂ | 26.441 | 1.814 | 14 | 25.279 | 24.117 | 1.162 | 24.5 | |
| G 7/8 | 7/8＂ | 30.201 | 1.814 | 14 | 29.039 | 27.877 | 1.162 | 28 | |
| G 1 | 1＂ | 33.249 | 2.309 | 11 | 31.77 | 30.291 | 1.479 | 30.5 | |
| G 1 1/8 | 1 1/8＂ | 37.897 | 2.309 | 11 | 36.418 | 34.939 | 1.479 | 35 | |
| G 1 1/4 | 1 1/4＂ | 41.91 | 2.309 | 11 | 40.431 | 38.952 | 1.479 | 39.5 | |
| G 1 3/8 | 1 3/8＂ | 44.323 | 2.309 | 11 | 42.844 | 41.365 | 1.479 | 41.5 | |
| G 1 1/2 | 1 1/2＂ | 47.803 | 2.309 | 11 | 46.324 | 44.845 | 1.479 | 45 | |
| G 1 3/4 | 1 3/4＂ | 53.746 | 2.309 | 11 | 52.267 | 50.788 | 1.479 | 51 | |
| G 2 | 2＂ | 59.614 | 2.309 | 11 | 58.135 | 56.656 | 1.479 | 57 | |
| G 2 1/4 | 2 1/4＂ | 65.71 | 2.309 | 11 | 64.231 | 62.752 | 1.479 | 63 | |
| G 2 1/2 | 2 1/2＂ | 75.184 | 2.309 | 11 | 73.705 | 72.226 | 1.479 | 72.5 | |
| G 2 3/4 | 2 3/4＂ | 81.534 | 2.309 | 11 | 80.055 | 78.576 | 1.479 | 79 | |
| G 3 | 3＂ | 87.884 | 2.309 | 11 | 86.405 | 84.926 | 1.479 | 85.5 | |
| G 3 1/4 | 3 1/4＂ | 93.98 | 2.309 | 11 | 92.501 | 91.022 | 1.479 | 91 | |
| G 3 1/2 | 3 1/2＂ | 100.33 | 2.309 | 11 | 98.351 | 97.372 | 1.479 | 97.75 | |
| G 3 3/4 | 3 3/4＂ | 106.68 | 2.309 | 11 | 105.201 | 103.722 | 1.479 | 104 | |
| G 4 | 4＂ | 113.03 | 2.309 | 11 | 111.55 | 110.072 | 1.479 | 110.5 | |
| G 4 1/2 | 4 1/2＂ | 125.73 | 2.309 | 11 | 124.251 | 122.772 | 1.479 | 123 | |
| G 5 | 5＂ | 138.43 | 2.309 | 11 | 136.951 | 135.472 | 1.479 | 136 | |
| G 5 1/2 | 5 1/2＂ | 151.13 | 2.309 | 11 | 149.651 | 148.172 | 1.479 | 148.5 | |
| G 6 | 6＂ | 163.83 | 2.309 | 11 | 162.351 | 160.872 | 1.479 | 161.5 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条