2) Dynamic measurement
动态检测
1.
Quasi-dynamic measurement technology for grain moisture content based on DSP and MPU;
基于DSP和单片机的谷物含水率准动态检测技术研究
2.
Taking natural frequency and motion track of the Shale Shaker as the examples,the application of VI based on VIC in dynamic measurement of Shale Shaker is given at last.
文章介绍了基于秦氏模型智能控件化虚拟仪器的概念、仪器开发系统和智能控件化虚拟仪器的开发等,阐明了这类仪器的开发过程和方法,并给出了其在钻井振动筛固有频率和筛箱运动轨迹动态检测中的应用。
3.
The gas sensing behavior of a single SnO_2 sensor was investigated in detecting carbon monoxide gas based on a dynamic measurement method in which temperature was modulated by heating waveform and frequency.
研究以单个SnO2 传感器为敏感元件对CO进行动态检测 ;讨论了SnO2 气体传感器动态检测方法的理论基础。
3) Dynamic detection
动态检测
1.
JZD-1 locomotive dynamic detection system;
JZD-1型机车动态检测系统
2.
Dynamic detection for the height of contact wire;
接触网导线高度动态检测系统
3.
A new dynamic detection technique for locomotive bearings;
机车轴承新的动态检测技术
4) dynamic testing
动态检测
1.
Data collecting design of pilling foundation dynamic testing system based on USB2.0;
基于USB2.0的桩基动态检测系统的数据采集设计
2.
On the basis of the requirement of dynamic testing for a airborne optoelectric platform,the tracking errors and acquiring characteristics of the airbome optoelectric platform were tested simulatively in a lab and the possibility of application of new deigned equipment to dynamic testing was analyzed.
结合现有的工程实际与工艺水平讨论了动态检测装置地物目标仿真器(动态精度检测的核心测试设备)的工程化原理与设计,并进行了三维建模实践。
5) dynamic detecting
动态检测
1.
Research on dynamic detecting system of ball screw helical line error based on FPGA;
基于FPGA的滚珠丝杠螺旋线误差动态检测系统
2.
In order to implement the detecting of abrasion of contact wire and rail abrasion for non-contact and dynamic, thenon-contact and dynamic detecting platform with the fast linear array CCD photography technology was developed byscience and technology institute of Shanghai Railway Administration.
为了实现电力接触导线磨损非接触式动态检测和轨道磨损非接触式动态检测,上海铁路局科研所采用高速线阵列电荷耦合器件(CCD)摄像技术研发了非接触式动态检测平台,应用到上海局鹰厦线电力接触导线磨损检测。
6) dynamic inspection
动态检测
1.
A new dynamic inspection platform are introduced.
介绍了一种新型动态检测平台,设计了GPS动态差分试验和双动态差分试验,分析了GPS动态单点定位、动态差分测量、双动态差分测量在两种不同速度条件下进行了的试验数据。
2.
A new method of dynamic inspection of train wheel-set journal using linear array CCD imaging system is proposed.
通过对线阵CCD成像系统的研究,提出了机车轮对轴颈磨损的CCD成像拼接动态检测方法,分析了该方法的可行性。
补充资料：CPU自动检测
以前的老式主板需要用户自己设定CPU的外频，倍频以及电压等参数（一般都是通过跳线来设定），现在生产的主板都能自动检测到这些参数，进而正确设定这些参数，并保存在CMOS中。在CMOS掉电时，也不需要打开机箱重新进行设置。
另外，现在的主板还具有老式主板所没有的CPU温度检测报警功能。CPU温度过高会导致系统工作不稳定或者死机，甚至损坏CPU等，所以对CPU的温度检测是很重要的。它会在CPU温度超出安全范围时发出警告检测。温度的探头有两种：一种集成在处理器之中，依靠BIOS的支持；另一种是外置的，在主板上面可以见到，通常是一颗热敏电阻。它们都是通过温度的改变来改变自身的电阻值，让温度检测电路探测到电阻的改变，从而改变温度数值。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条