1) steam torque
蒸汽力矩
1.
The steam torque formulae used for turbine-generator when torsional vibration occured was derived in this paper.
推导了轴系发生扭振时蒸汽力扭矩的表达式,利用该式可研究汽轮发电机组轴系上的蒸汽力矩与扭振的相互影响。
2) steam power
蒸汽动力
1.
Based on the process energy integration technique, optimal retrofit of steam power systems in petrochemical enterprise has been studied and the optimization strategy has been proposed.
利用过程能量综合技术对蒸汽动力系统的优化改造进行研究 ,提出了蒸汽动力系统的优化策略 ,建立了以总运行费用最小为投资决策目标函数的系统软件模型 ,基于MS Excel 2 0 0 0的软件开发平台 ,开发了蒸汽动力系统优化求解的计算机软件。
2.
A model was established to optimize the multi period operation of the steam power system by using the Mixed Integer Linear Programming to solve the turbine's nonlinear work done process, and using GAMS to obtain the minimum cost at different multi periods.
针对蒸汽动力系统必须满足外界用户不断变化的对蒸汽和电力的需要 ,需适时地改变操作参数以降低运行成本的情况 ,建立了蒸汽动力系统的操作调优模型 ,用混合整数线性规划处理了汽轮机的非线性作功过程 ,用通用建模工具GAMS求解了不同工况下的最低成本。
3) vapour pressure
蒸汽压力
1.
Aimed at the problem that the vapour pressure of chain type boiler is restricted by many factors the fuzzy control mode of self adaptive fuzzy controller with PID is selected.
针对链条式锅炉的蒸汽压力受诸多因素制约的问题，选用带有ＰＩＤ 自适应模糊控制器的模糊控制方式，阐述了该控制方式系统的工作原理、设计原则、以及其优越性，介绍了该系统的硬件和软件设计方案。
2.
The factors investigated included form-fixing vapour pressure, form-fixing time and unloading speed.
以蒸汽压力、时间及定形结束时蒸汽卸压速度为参数,对杉木压缩整形工艺的定形进行了试验。
4) pressure steam
压力蒸汽
1.
Objective Discuss sterilization effect of B-class pulsation table top vacuum pressure steam sterilizer for dental handpiece.
目的探讨B级脉动真空压力蒸汽台式灭菌器对牙科手机的灭菌效果。
2.
Objective To compare the sterile effects between pressure steam sterilization and ozone in sterilizing bed mattresses.
目的比较大型压力蒸汽消毒法和臭氧消毒法对医院床垫的消毒效果。
5) autoclaving
压力蒸汽
1.
In order to compare the disinfection efficacy of different disinfection methods in disinfection of stomatological handpiece in medical institutions,field sampling examination method was used to observe the efficacy of ultraviolet irradiation,disinfectant wiping and autoclaving in disinfection of toothdrill handpiece.
为了比较不同消毒方法对医疗机构口腔科手机消毒效果,采用现场采样检测方法,对紫外线照射法、消毒剂擦拭法和压力蒸汽灭菌法消毒牙钻手机的效果进行了观察。
6) vapor pressure
蒸汽压力
1.
Under such temperatures,moisture absorbed by polymer materials evaporates,generating high internal vapor pressures in the voids.
研究SMT回流焊工艺中,温度、潮湿和蒸汽压力耦合作用对PBGA器件开裂失效的影响。
2.
Based on the mathematics physics model established before, a simulation study about the effect of vapor pressure on the heat transfer enhancement performance of the inside and outside triangle finned tube with small spiral angles has been carried out under the condition of various condensation heat_transfer differences in temperature.
根据笔者此前所建立的数学物理模型 ,在不同的冷凝换热温差下 ,进行了蒸汽压力对小螺旋角内外螺旋翅片管强化传热特性影响的模拟研究 。
3.
The vapor pressure during reflow soldering processes was simulated by Kitano-and Galloway-type formulations of Wong model.
本文分别采用Fick第二定律和Fourier热传导定律模拟了板条的湿气场和温度场,并利用分离变量法给出了板条湿气场和温度场的解析解;采用Wong模型的Kitano和Galloway形式,模拟了回流焊接过程中产生的蒸汽压力;基于Weitsman湿热粘弹性本构关系,利用半逆解法和Laplace变换法,给出了在蒸汽压力作用下湿热粘弹性板条位移场和应力场的解析解。
补充资料：纯轧力矩(见轧制力矩)
纯轧力矩(见轧制力矩)
net rolling torque
ehunzha iiju纯轧力矩(net rolling torque)见轧制力矩。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条