1)  rubber gasket
胶圈接口
1.
The rubber gasket pipe for drainage can be installed in many ways, but most are of complicated operation, low efficiency and hard labour, so they can meet the demand in production.
排水管道胶圈接口的安装方法有很多种，但由于其操作麻烦，工效低，劳动强度大，不能满足生产的需要，作者根据工程实践提出了卷扬机水平拉管安装法。
2)  rubber ring
胶圈
1.
Direct to parts damage accident frequently accured in middle carrier of hydrological drill,by investigation and analysis,modifies three main parts and adding general utility coupling spring pin and rubber ring,that is to change rigid conjunction to elastic conjonction according to actual situation,which has achieved good result.
针对原车装水文水井钻机的中间车经常出现零部件损坏事故,经过认真调查分析,根据实际情况,改动了三个主要部件,增加了通用联轴器弹性套柱销与胶圈,即将刚性联接变成了弹性联接,取得显著效果。
2.
The article discussed application of new technologies in heat exchanger design practice, such as those on using rubber ring seal to strengthen the sealing between the heat exchanging tube and the tube-plate, using jacketed tube to strengthen the connection of the corrugated tube and the baffle, and using spiral flow to eliminate the dead zone.
文中阐述了在换热器的设计实践中,采用胶圈密封,加强换热管和管板之间的密封;利用套管加强波纹管与折流板的连接,采用螺旋流来消除死区等新技术在换热器中的应用。
3)  aprons
胶圈
1.
Starting with the application of aprons,analysis is done to application of aprons regarding the main functions and the specifications.
从胶圈的应用技术入手,分析了胶圈在使用过程中的主要作用及技术特点,探讨了纺纱牵伸过程中对成纱质量的主要影响因素,提出了进一步开发胶圈应用技术的意见。
2.
Through allocation trial of variety specification of cots and aprons,ideal process plan is optimized for better spinning quality,consequently a good result.
通过胶辊、胶圈不同纺纱工艺参数的配置试验,优选出较好的工艺方案,达到了提高成纱质量的目的,取得了好的效果。
3.
Description is done that application of cots and aprons is a systematic engineering,part of the spinning process.
论述了胶辊、胶圈应用技术具有系统性,是纺纱系统工程的组成部分。
4)  Apron
胶圈
1.
Using Management Experiences of Top Roller and Apron of Imported Spinning Equipment;
进口棉纺设备胶辊胶圈的使用管理体会
2.
Speciality and Spinning Test of JF Spinning Double Short Apron Draft Form;
JF型细纱双短胶圈牵伸形式特点及纺纱试验
3.
Practice on Spinning C 9.7 tex with Soft Elastic Top Roller and Apron;
采用软弹胶辊胶圈纺制C 9.7 tex纱的实践
5)  Apron Draft
胶圈牵伸
6)  sealant rubber ring
密封胶圈
1.
By the analysis of the situation of sealant rubber ring application to the worksites of Xiaowa Oilfield, the main reasons re- sulting in the frequent leakage of sealant rubber rings are found out, thus providing the reference for the spot management of the same oilfields with viscous crude.
针对小洼油田生产现场的密封胶圈使用情况进行分析,找出了造成密封胶圈频繁漏失的主要原因,为同类稠油油田现场管理提供参考。
参考词条
补充资料：纺纱用牵伸胶圈
分子式：
CAS号：

性质：系用于纺纱机起牵伸作用的橡胶配件，又称牵伸皮圈。圆筒形，由内、外胶层和增强层三部分组成，增强层一般由螺旋形棉线和尼龙线组成。分上下胶圈，一般成对使用。按用途分棉纺胶圈、毛纺胶圈和化纤纺纱胶圈。根据所接触的金属及纤维，其胶层应有一定的摩擦系数、弹性和硬度，并具有耐磨、耐屈挠、耐老化、耐油性能以及适当的强度。一般用丁腈橡胶及其并用胶料制造。经混炼、滤胶、挤出、成型、硫化而制成。成型用芯棒法、硫化用硫化罐硫化。产品广泛用于棉纺、麻纺、无纺、化纤纺及精纺等纺纱机。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。