1) diversion fire time
转火时间
2) Quenching Transferring Time
淬火转移时间
1.
Effects of Quenching Transferring Time on the Intergranular Corrosion Resistance of Aluminum Alloy 7055;
淬火转移时间对7055铝合金抗晶间腐蚀能力的影响
3) tempering time
回火时间
1.
The effect of tempering time on tempering hardness,the tempering curve,the effects of carbon and alloy elements on tempering curve are studied.
通过试验探讨了回火时间对淬硬钢的回火硬度的影响,分析了不同淬硬钢的回火曲线及其走向与特征,讨论了碳和合金元素对淬硬钢回火曲线的影响,建立了针对于碳钢和合金钢的回火硬度与回火温度关系的模型。
2.
The effect of tempering time on T91\'s rupture life is dependent on the stress applied on the specimen.
研究了不同回火时间对T91钢625°C下持久性能及形变前后组织的影响。
3.
The influence of diffusion activation energy of carbon atom and tempering time on tempering transformation of martensite are studied by using of the principle of carbon diffusion in martensite.
根据马氏体回火过程中的碳原子扩散特征,分析和计算了碳扩散激活能和回火时间对马氏体组织的影响。
4) ignition time
着火时间
1.
Temperature profiles,mass loss rate,ignition time,ignition temperature and critical heat flux were all examined in the experiments.
分析热解与着火过程中木材试样不同深度的温度变化与失重变化,对木材的着火时间与着火温度进行记录,并着重分析水分对木材温度分布、着火时间与着火温度的影响。
2.
The ignition time of wood pre- di.
模型对木材热解与着火过程中的温度变化、失重以及着火时间进行了预测,且预测值与实验值吻合得较好,最后分别将该微分模型、一个经典的热解与着火积分模型的预测值与实验值对比,发现考虑热解与着火过程复杂物理与化学变化的微分模型的预测结果与实验结果吻合较好。
3.
An integral formula was applied to predict the ignition time of solid combustibles.
为了准确快速地预测可燃物的着火时间,根据积分方法的思想,推导了预测固体可燃物受线性变化热流作用的着火时间公式。
5) Annealing Time
退火时间
1.
The effect of annealing time on damping capacity of hot-rolled Mg0.
研究了不同退火时间对Mg-0。
2.
A mathematical model for heat transfer process in HPH furnace was established and verified,then applied to analysis of the relationship between gas flow rate and annealing time.
通过建立全氢罩式退火炉炉内传热过程的数学模型 ,并经过实测验证后 ,分析了循环风量与退火时间的关系。
3.
03(BLTN) ferroelectric thin films were prepared on Si substrate by sol-gel method,the effects of the annealing temperature,heating rate and annealing time on microstructure of BLTN films were investigated.
03(BLTN)铁电薄膜,研究了退火温度、升温速率和退火时间对BLTN薄膜微观结构的影响。
6) ignition time
点火时间
1.
The article concentrates on the ignition time under different conditions such as the radiation flux,the distance between the sample and the radiation source and the sample obliquity.
利用正交化实验方法,在火灾早期特性实验台上进行了一系列实验,实验过程采用摄像机进行拍摄,对摄像结果进行分析后,得出不同工况条件下木材的点火时间(诸工况包括辐射源功率、样品与辐射源距离和样品倾角等),从实验角度进行初步分析后,再利用数值分析理论计算出它与各种工况的函数关系。
2.
5W laser diode Ignition tests are performed on pyrotechnic material Zr/KClO 4 The relation between the sensitivity of Zr/KClO 4 and its parameters such as mass ratio and density are investigated by determining the ignition time.
通过对点火时间的测定，研究了Ｚｒ／ＫＣｌＯ４的激光感度与配比、密度等参数的关系。
3.
By using of mathematical models, derived leak caused by the loss of hose is simulated and the leakage concentration with the changes of time is concluded, impact of the ignition time to the indoor gas accident is analyzed,and preventive measures, such as elimination and control of fire sources,prevention to the formation of explosive mixtures and optimal alloc.
分析了点火时间对室内燃气事故的影响,提出了控制消除引火源、防止形成爆炸性混合物以及燃气设施的优化配置等相应预防措施。
补充资料：世间转法转智转无尽
【世间转法转智转无尽】
世间转者，谓展转摄前众生界、世界、虚空界也。法转者，谓展转摄前法界、涅槃界、佛出现界也。智转者，谓展转摄前如来智界，心所缘佛智所入境界也。盖此三转，皆言无尽者，以世法智之三种，展转含摄，无有穷尽，是名世间转、法转、智转无尽。
世间转者，谓展转摄前众生界、世界、虚空界也。法转者，谓展转摄前法界、涅槃界、佛出现界也。智转者，谓展转摄前如来智界，心所缘佛智所入境界也。盖此三转，皆言无尽者，以世法智之三种，展转含摄，无有穷尽，是名世间转、法转、智转无尽。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条