2) Gas medium
气体介质
1.
A new technology:Cementing in gas medium
气体介质条件下的固井技术
2.
A new combined machining technology called ultrasonic vibration assisted electrical discharge machining in gas medium was proposed and the principle of which was introduced.
提出了超声振动-气体介质电火花复合加工技术,在简述其加工原理的基础上分析了超声振动在改善气体介质电火花加工中的作用,以及相关的理论机理。
3.
Owing to the influence of gas medium s temperature and compression, We should correct the flow quantity according to the present measured values of temperature and compression.
流量积算仪是用来接收流量传感器信号的二次仪表由于气体介质温度、压力的影响，在测量时需根据当时所测得的温度、压力值进行修正，以保证流量测量的准确性本文讨论温度压力补偿的硬件电路，特别着重分析用单片机进行非线性补偿的特点及查表法和折线法的综合应用
3) air-dense medium
空气重介
1.
Coal dry beneficiation with air-dense medium fluidized bed(ADMFB) is a nonlinear,and multivariable coupling system.
针对空气重介流化床干法分选系统具有多变量、非线性、强耦合和参数不确定性的特点,提出了两级串联结构的自适应模糊神经网络解耦控制策略,前级为基于连续性智能权函数规则的自调整模糊控制器,后级为基于动态耦合特性的自适应神经元解耦控制器。
2.
This paper mainly discusses the contribution and the characteristics of mediumdraining screen in the air-dense medium separation system.
本文简要论述了干法脱介筛在空气重介干法分选工艺系统中的作用及特点；阐明了干法脱介筛的工作原理及结构特点；说明其主要参数选取的依据及方法。
3.
Principle and problems existing in use about 2ZQB2030 medium draining screen,the matching equipment of dry coal cleaning by use of air-dense medium fluidized bed was introduced.
介绍空气重介流化床干法选煤的配套设备2ZQB2030干法脱介筛的工作原理,分析运用中存在的问题,针对存在的问题提出了相应的改进措施。
4) Gas
[英][ɡæs] [美][gæs]
气体介质
1.
Gas Flow Field Simulation During Ultrasonic Vibration Assisted Gas Medium EDM Based on Fluent Software;
基于Fluent的超声振动-气体介质电火花加工气体流场模拟
2.
A new EDM technology-ultrasonic vibration assisted electrical discharge machining in gas was proposed and corresponding experimental equipment was designed.
简述了超声振动辅助气体介质电火花加工原理,并设计开发了相应的实验机床。
3.
In addition,this work described the effect mechanism of gas medium and ultrasonic vibration on material remove.
简述了超声振动辅助气体介质电火花加工原理,分析了超声振动辅助气体介质电火花加工电极材料抛出的物理过程,探讨了工件材料抛出机理以及气体介质、超声振动对材料蚀除的影响机理。
5) gas dielectric
气体介质
1.
The research of this dissertation mainly focus on the technology of electrical discharge milling(ED-Milling) based on gas dielectric which is composed of three ED-Milling methods including conventional ED-Milling in gas,ultrasonic vibration aided ED-Milling in gas as well as gas medium ED-Milling submerged in liquid.
本文所研究的基于气体介质的电火花铣削加工技术主要指气中电火花铣削加工以及相应的超声辅助气中电火花铣削加工和浸液辅助气中电火花铣削加工。
2.
The research of this dissertation mainly focus on the numerical solutions to the temperature for single pulse discharge based on gas dielectric.
本文所研究的是气体介质单脉冲火花放电温度场数值仿真。
6) dielectric gas
介电气体
补充资料：介气
1.刚直的气质。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条