1) ordinary point
常点
2) lattice constants
点阵常数
1.
The high temperature phases,lattice constants and coefficient of thermal expansion of the 7A52 aluminum alloy at different temperature have been measured by in-situ high-temperature X-ray diffraction method.
用原位加热X射线衍射方法测量了7A52合金铸锭在不同温度下的X射线衍射谱,确定不同温度下该合金中存在的物相,精确计算基体在不同温度下的点阵常数和不同温度区间的热膨胀系数。
3) the normal boiling point
正常沸点
1.
Comparison and evaluation of group-contribution techniques for estimating the normal boiling point of organic compounds;
估算有机物正常沸点的基团贡献法比较与评价
2.
In the point of view of molecule force theory, the physical regularity reflected in physical phenomenon of the normal boiling point for open chain, aromatic, alicyclic hydrocarbons and carboxylic acids, a new theoretical equation of the normal boiling point for them is proposed.
应用分子力学理论揭示出烃类和羧酸等的正常沸点Tb这一物理现象中的物理规律性,从而提出其正常沸点的理论方程,物理意义明确,经用链烃,环烃和羧酸等的298个纯质的实测值验算,平均误差为0。
4) lattice parameter
点阵常数
1.
The lattice parameter for Cu is 0.
结果表明,机械合金化过程中Cu粉和C粉形成了层状复合粉末;随着球磨时间的增加,C的衍射峰逐渐消失,Cu的衍射峰逐渐宽化,并且位置发生偏移;球磨24h后,C原子固溶到Cu中,Cu的点阵常数达到0。
2.
A neural network method is proposed to quickly and precisely predict lattice parameters of γ' and γ phases at different temperatures for nickel-base superalloys.
介绍了一种测算镍基高温合金在不同温度下γ’和γ相点阵常数的简捷人工神经网络法。
3.
The crystal structure and its lattice parameter of sapphire single crystal grown by EFG method was determined by selected area diffraction of transmission electron micrograph (TEM).
用透射电镜选区电子衍射(TEM)方法测试了导模法生长的白宝石单晶体的晶体结构和点阵常数。
5) lattice constant
点阵常数
1.
The crystal lattice constant is an important parameter of the crystal and it changes extremely slightly.
晶体的点阵常数是晶体的重要参数,它的改变是极细微的。
2.
In this paper,we apply X ray diffractometer method to determine the crystal space lattice constant of spectrum pure metallic copper Cu accurately.
用X射线衍射仪法对光谱纯铜进行了点阵常数的精确测定,给出了测定值。
3.
The αphase is mojior portion of aluminizing layer microstructure, and αphase lattice constant is incresed in direct ratio with Al content.
渗层组织主要是α固溶体,α相的点阵常数随Al浓度增加呈直线上升。
6) normal boiling point
正常沸点
1.
Study on the relationship between normal boiling points of alkanes and their molecular structures by using molecular topology;
烷烃正常沸点与分子结构的拓扑相关性研究
2.
From the relation between vaporization heat(or normal boiling point) and carbon number,the correlation between vaporization heat and normal boiling point was theoretically deduced,and a simple but valid equation was fitted:Hυ=23.
通过对正烷烃蒸发热、正常沸点与碳数关系的研究,理论推导出蒸发热与正常沸点之间的关系,并拟合得一简单适用的公式:Hυ=23。
3.
A method of predicting vapor pressures of hydrocarbons from the normal boiling points and the molecular formulas is proposed.
提出一个只由正常沸点和分子式估算烃类物质蒸气压的方法。
补充资料:闭式单点、双点压力机
| |||||||
主要参数内容 | 国际先进 | 国内先进 | 国内一般 | 国内落后 | 评定方法及说明 | ||
(一)加工精度 | 参照GB10924-89、GB10933-89、JB5200-91 | ||||||
1、滑块下平面对工作台上平面的平行度(mm) | 30%精度储备 | 20%精度储备 | 达到规定值 | 大于规定值 | |||
0.02+0.10/100×滑块下平面的被测长度 | |||||||
2、滑块行程对工作台上平面的垂直度 | 30%精度储备 | 20%精度储备 | 达到规定值 | 大于规定值 | |||
0.05+0.02/100×滑块行程长度 | |||||||
(二)结构性能 | |||||||
1、离合器、制动器接通率,当滑块行程次数≤16次/分时为70%,≤25次/分时为60%,≤45次/分时为50% | 大于规定值10% | 大于规定值 | 达到规定值 | 达不到规定值 | |||
2、液压超负荷保险装置、微调装置、吨位指示器 | 全部具有 | 全部具有 | 部分具有 | 没有 | |||
(三)噪声dB(A) | |||||||
1、公称力≤400kN | ≤85 | ≤87 | ≤88 | >88 | |||
2、公称力>400kN | ≤87 | ≤88 | ≤90 | >90 | |||
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条