1)  wheel rim
叶轮轮缘
2)  impeller
叶轮
1.
Tool-path planning for rough machining of impeller in 5-axis machine tools;
五坐标加工整体叶轮粗加工刀位规划
2.
Reverse engineering design of submersible mixer's impeller based on Surfacer and Pro/Engineer;
基于Sufacer和Pro/E的潜水搅拌器叶轮反求设计研究
3.
Inspecting defects inside impeller of electric submersible pump by fluid pressure loss measurement method;
流体压力损失法检测电潜泵叶轮缺陷的研究
3)  blade
叶轮
1.
The Experimental Study of Power Characteristic on Blades of Minitype Concentrated Wind Energy Turbine;
小型浓缩风能型风力发电机叶轮功率特性的试验研究
2.
Pressurized water is usually used to clear dust deposits on the blades of steel-making plant fans.
对目前广泛采用的炼钢厂一次烟气引风机叶轮冲水清灰效果不佳的原因进行了分析,提出采用压缩气体清灰的思路,并计算了供气压力。
4)  impellers
叶轮
1.
In view of the damage to impellers and mechanical seals of the medium pressure carbonate solution pumps during operation,this paper briefly analyzes the reasons for the damage and presents the fabrication method of the welding impellers which substitute for the original casting impellers It also presents the application effects of the welding impeller
针对中压碳铵溶液泵在运行中出现的叶轮、机封等的损坏事故 ,简要分析发生事故的原因 ,介绍将铸造叶轮改为焊接叶轮的制造方法及使用效
2.
According to the calculation results, three different outlet impellers were designed for a certain range viscosity of pumping medium.
粘性流体在离心泵内流动时 ,叶轮流道内附面层变厚 ,流动排挤作用增强 。
3.
Manufacturing problem of the impellers of mixed flow pump are studied, and the relevant geometrical model is described.
对混流泵叶轮的制造问题进行研究。
5)  rotor
叶轮
1.
Quantitative optimization method for rotor geometric parameters of liquid turbine flow sensor;
液体涡轮流量传感器叶轮几何参数定量优化方法
2.
Distribution of velocity-moment at rotor outlet in blade design of axial-flow pumps;
轴流泵叶片设计中叶轮出口液体速度矩分布
3.
Research on High Efficiency Manufacture Process of Aluminum Alloy Rotor;
铝合金叶轮高效加工工艺研究
6)  vane wheel
叶轮
1.
NC experiment of the 4-axis side milling for the vane wheel;
四坐标侧铣方法加工叶轮的数控实验
2.
Die-casting process and design of die for vane wheel;
叶轮压铸工艺与模具设计
3.
The paper analyzes the lose efficacy form,wear and tear mechanism of vane wheel.
分析了叶轮的失效形式及磨损机理,设计出一种新型高铬锰铸铁耐磨叶轮。
参考词条
补充资料:八缘──地动八缘
【八缘──地动八缘】
  ﹝出增一阿含经﹞
  [一、因水火风动故地动],经云:此阎浮提地,南北阔二万一千由旬,东西阔七千由旬,厚六万八千由旬。地下有水,厚八万四千由旬。水下有火,厚八万四千由旬。火下有风,厚六万八千由旬。风下有金刚轮,过去诸佛舍利,咸在其中。或有时大风忽动,火亦随动。火既动已,水复随动。水既动已,地即随动。故云因水火风动故地动。(梵语阎浮提,华言胜金洲。梵语由旬,华言限量,或四十里,或六十、八十里也。)
  [二、菩萨处母胎故地动],经云:菩萨从兜率天降神来处母胎,是时地亦大动。(梵语兜率,华言知足。佛在兜率天时,称为菩萨。)
  [三、菩萨出母胎故地动],经云:菩萨出母胎时,是时地亦大动。
  [四、菩萨成道故地动],经云:菩萨出家学道,成无上正觉,即名为佛,是时地亦大动。
  [五、佛入涅槃故地动],梵语涅槃,华言灭度,是时地亦大动。
  [六、比丘欲现神通故地动],梵语比丘,华言乞士。经云:有大神通比丘,欲现多种变化,或分一身为千百身,还复为一。飞行虚空,山石无碍,涌没自由,是时地亦大动。
  [七、诸天舍本形位得作天主故地动],经云:诸天有大神通,神德无量,从彼命终,还生彼处,由佛德力,舍本天形,得作帝释,或作梵主,是时地亦大动。(帝释,梵语释提桓因,华言能天主。梵主,即梵天主也。)
  [八、饥馑刀兵将起故地动],经云:若众生命终福尽,或互相攻伐,或值饥馑,或遇刀兵,是时地亦大动。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。