1) waste tyre
废胎胶
1.
Utilization status quo and processing technology of waste tyres;
废胎胶利用现状和加工技术
2) crumb rubber
废胎胶粉
1.
Crumb rubber modified asphalt can not only improve asphalt pavement performance, but also can achieve the waste re-use, further study on the crumb rubber modified asphalt isvery important.
废胎胶粉改性沥青不仅提高沥青性能,还可废弃物再利用,进一步开展废胎胶粉改性沥青机理研究十分重要。
4) ground rubber tire
废轮胎胶粉
1.
Waste polypropylene/ground rubber tire/waste nylon short fiber composites Ⅰ.Formulation;
废聚丙烯/废轮胎胶粉/废尼龙短纤维复合材料 Ⅰ.配方
2.
Waste polypropylene/ground rubber tire/wastenylon 6 short fiber composites Ⅱ. Technique conditions;
废聚丙烯/废轮胎胶粉/废尼龙短纤维复合材料 Ⅱ.工艺条件
5) waste tire rubber powder
废轮胎胶粉
1.
The impact strength of the PVC composite filled with small size (120～180 μm) waste tire rubber powder could be high to be more than 60 kJ/m 2 , which was the double impact strength of the original PVC material while the tensile strength of the PVC composite was affected less.
采用新方法生产的废轮胎胶粉 (粒径 12 0～ 180 μm)作为增韧材料填充到聚氯乙烯 (PVC)中 ,以提高PVC材料的抗冲击性能。
2.
Mechanical properties of polyethylene(PE) /waste tire rubber powder (WTRP) blends were studied.
利用废轮胎胶粉(WTRP)填充改性聚乙烯(PE),研究了 PE/WTRP 共混体系的力学性能。
3.
The paper introduced the application of waste tire rubber powder modified asphalt mixture to Zhangshi Expressway construction.
目前,废轮胎胶粉改性沥青在我国的道路工程应用中还处于试验与研究阶段。
6) ground tire
废轮胎胶粉
1.
Application of De-link to waste propylene/ground tire composite;
橡胶再生剂De-link在废轮胎胶粉增韧废PP复合材料中的应用研究
2.
2 parts of adhesive and 6 parts of short fiber with the length of 8 mm were incorporated and ENR latex and PP graft maleic anhydride were used as compatibilizer,the short fiber showed a remarkable reinforcing effect and the tensile strength of waste PP/ground tire(GT) composite improved significantly.
当粘合剂用量为短纤维用量的２０％，短纤维长度为８ｍｍ，短纤维用量为６份时，环氧化天然胶乳和ＰＰ接枝马来酸酐增容处理废ＰＰ／废轮胎胶粉复合材料的拉伸强度有很大提高，短纤维起到了明显的增强效果。
3.
Ground tire were modified by chlorination,and the influences of solvent,reaction time,reaction temperature and the flow rate of chlorine on chlorination effect,as well as the properties and microstructure of ground tire/PVC blend were investigated.
对废轮胎胶粉进行氯化改性,考察溶剂、反应时间、反应温度和氯气流速对氯化效果的影响,研究氯化改性胶粉/PVC共混物的物理性能和微观结构。
补充资料：废胶切割机
分子式：
CAS号：
性质：用于切割外胎等废旧橡胶块的设备，以便于下一工序的粗碎或粉碎。主要由顺料板、喂料辊、固定刀、回转刀和传动装置等组成。在切割机前后分别设置供料与排料的输送带。喂料辊为上下两个直径相等并相向回转的沟槽辊筒。回转刀为两片固定于辊面上的螺旋刀，由电机驱动。固定刀为直刀。工作时，废胶块经顺料板进入喂料辊，而后喂入固定刀与回转刀之间，对废胶块进行切割，最后由输送带排出。
CAS号：
性质：用于切割外胎等废旧橡胶块的设备，以便于下一工序的粗碎或粉碎。主要由顺料板、喂料辊、固定刀、回转刀和传动装置等组成。在切割机前后分别设置供料与排料的输送带。喂料辊为上下两个直径相等并相向回转的沟槽辊筒。回转刀为两片固定于辊面上的螺旋刀，由电机驱动。固定刀为直刀。工作时，废胶块经顺料板进入喂料辊，而后喂入固定刀与回转刀之间，对废胶块进行切割，最后由输送带排出。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条