1) old steel backbone disk
旧钢骨架盘
1.
The old steel backbone disk in brake application for airplane is tested by ground dynamic torque tests, using stantards of Chinese Technical Standard order (CTSO-C26C) shows that the properties of the old steel backbone disk in brake application for airplane completely meet the design requirements.
飞机上采用过的旧钢骨架制动盘,用中国民用航空局技术标准(CTSO-C262C)经过地面动态力矩试验,国产航空应用的旧钢骨架盘性能完全满足设计要求。
2) steel backbone disk
钢骨架盘
1.
The problems about state new steel backbone disk and old steel backbone disk in me chanical properties and microstructure were analyged.
研究国产航空制动钢骨架盘的力学性能及金相组织。
3) light steel skeleton
轻钢骨架
4) steel truss frame
钢骨桁架
1.
By optimizing the preparation test and adopting effective construction measures,the placement of C60 self-dense concrete with steel truss frame in Beijing Century Fortune Center Project achieved satisfactory effect.
通过优化配制试验和采取有效的施工措施,北京世纪财富中心工程钢骨桁架C60自密实混凝土的浇筑取得理想效果。
5) steel skeleton
钢骨架
1.
Analysis of influence factor on safety and durability of steel skeleton of solar greenhouse;
影响日光温室钢骨架结构安全及耐久性能因素分析
2.
With the development of solar greenhouse plant economy in Ningxia rural area,the steel skeleton of solar greenhouse is applied more and more.
随着宁夏地区农村温室种植经济的发展,钢骨架日光温室的应用越来越广泛。
3.
In the processing of construction and maintenance of arched solar greenhouse in Ningxia,there is a common phenomenon that rearward of front roof steel skeleton is more flat.
在宁夏地区大量的拱形日光温室的建造和维修过程中,日光温室钢骨架普遍存在拱形前屋面后段较为平缓的现象,这一现象会对日光温室的应用造成不利影响。
6) steel pipe frame
钢管骨架
1.
The structure of Shenzhen Children s Hall is very complex and many structural styles were adopted such as huge truss, large diameter steel pipe frame ellipsoid, steel pipe frame sphere, and light steel truss and so on.
深圳市少年宫结构形式复杂 ,应用了巨型桁架、大直径钢管骨架椭球体、钢管骨架球体、轻型钢桁架等多种结构形式 ,其中 ,大直径钢管骨架椭球体是设计施工的难点和重点 ,本文主要介绍该结构的制作安装。
补充资料：钢球盘磨机
分子式：
CAS号：
性质：是盘式辊磨机的一种，其有一排或多排钢球处于两个座圈之间，上座圈不动，用弹簧或液压施压于钢球，下座圈抖动，顶部有分级机。过载时上座圈可略为升起，对于湿物料可以送入高温的热风起干燥作用并夹带磨碎产品排入上方的风力分级机(图暂缺)。钢球直径为235mm或1070mm。该机产量高，一般用于煤的粉碎。
CAS号：
性质：是盘式辊磨机的一种，其有一排或多排钢球处于两个座圈之间，上座圈不动，用弹簧或液压施压于钢球，下座圈抖动，顶部有分级机。过载时上座圈可略为升起，对于湿物料可以送入高温的热风起干燥作用并夹带磨碎产品排入上方的风力分级机(图暂缺)。钢球直径为235mm或1070mm。该机产量高，一般用于煤的粉碎。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条