1) topology analysis units
拓扑分析单元
2) topological unit
拓扑单元
1.
By means of utilizing three kinds of practical topological units and a kind of virtual topological unit and by combining with the synthetic method for topology dimensionality of the spatial active ability of each topological unit an analysis on the configuration of series parallel mechanism was carried out.
传统的串联和并联机构自由度分析和奇异分析方法,对于串并联机构不具有直接适用性,通过利用3种实际拓扑单元和一种虚拟拓扑单元,结合各拓扑单元空间活动能力的拓扑维度综合法,对串并联机构的构型进行了分析,并得到了其空间活动能力拓扑维度的一般计算公式与过程,基于计算的结果可以对机构的奇异性进行分析。
3) Topological analysis
拓扑分析
1.
The structure of preform is described, the processing parameters are predicted in theory and the designs of functional and structural composites are provided by the method of topological analysis.
本文用拓扑分析方法，对预制件结构做了说明，并对工艺参量进行了理论预测，为设计功能复合材料和特殊结构复合材料提供了新的手段。
2.
Based on this model,a new topological analysis method based on node-merging and individual searching is put forward.
采用CIM建模表示法构建了配电网综合模型,在此基础上提出了一种用节点融合和分级搜索相结合的拓扑分析新方法。
3.
The thermodynamic system heat balance calculation method based on a topological analysis is considered as the most successful computer based method for calculating thermal power plant heat balance.
热力系统拓扑分析的热平衡计算方法是火电厂热平衡计算中最成功的计算机处理方法。
4) topology analysis
拓扑分析
1.
Simple loop topology analysis based on adaptive Petri net for directional protections in multi-loop electric power network;
基于适应型Petri网的多环电网方向保护简单回路拓扑分析
2.
Distribution network topology analysis and application based on object oriented and linked storage structure;
基于面向对象与链式存储结构的配电网拓扑分析方法
3.
New method of power network topology analysis based on ComGIS and spatial database;
基于ComGIS和空间数据库相结合的电力网络拓扑分析新方法
6) topological reanalysis
拓扑重分析
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条