1) oxygen recombination efficiency
氧的复合反应效率
2) combined anaerobic reactor
复合厌氧反应器
1.
The two-stage combined anaerobic reactor of UASB and AF was used to treat domestic sewage,and the quick startup conditions were especially investigated.
采用两段式UASB+AF复合厌氧反应器处理生活污水,着重研究了其快速启动的条件。
2.
Highly concentrated organic wastewater of distillery is treated by solid-liquid separation-anaerobic digestion(combined anaerobic reactor)-physico-chemical treatment.
酒厂高浓度有机废水经过固液分离—厌氧消化 (复合厌氧反应器 )—物化处理 ,三段逐级去除废水中的“SS” ,每段均具有突出的“SS”去除能力 ,同时COD去除率高。
3) hybrid anaerobic reactor
厌氧复合反应器
1.
Starting-up an hybrid anaerobic reactor for treating desizing wastewater;
厌氧复合反应器处理退浆废水的启动研究
4) hybrid anaerobic reactor
复合厌氧反应器
1.
In the hybrid anaerobic reactor,both anaerobic sludge and biofilm were used to achieve the removal of organic matters.
复合厌氧反应器利用厌氧污泥及生物膜共同实现对有机物的去除,通过上部滤料层防止厌氧污泥流失,采用定期释放下部气囊中产生的沼气冲洗滤料层生物膜以防止滤层堵塞。
2.
Pilot-scale test was made on nightsoil wastewater t reatment by using hybrid anaerobic reactor - SBR process.
采用复合厌氧反应器—SBR工艺进行了粪渣废水处理的中试,结果表明,处理后出水的各项指标都能满足GB8978—1996的三级标准,且脱氮效果显著。
3.
The experimental results show that COD , BOD and NH 3-N in the leachate can be removed effectively by using hybrid anaerobic reactor/ammonia stripper/anoxic oxic submerged biofilm aeration basin process.
试验表明 ,采用复合厌氧反应器和A/O淹没式生物膜曝气池及碱化吹脱塔技术可以有效地去除渗滤液中的COD、BOD和氨氮。
6) reaction efficiency
反应效率
1.
This paper discussed the effect of cationic agent and catalyst dosages, reaction temperatureand reaction time on the degree of substitution and reaction efficiency of cationic starch prepared by dry process.
讨论了干法制备阳离子淀粉工艺中阳离子试剂、催化剂用量及反应温度、反应时间等因素对取代度和反应效率的影响。
2.
The effect of different reaction conditions on the substituted degree(DS) and reaction efficiency of starch phosphate monoester were also studied in this paper.
采用磷酸与焦磷酸钠按一定配比混合作为酯化试剂,尿素为催化剂干法制备高取代度磷酸单酯淀粉,并研究不同反应条件对磷酸单酯淀粉取代度(DS)及反应效率的影响。
3.
7 g,the optimized reaction efficiency was obtained;under the conditions that sodium/ amine molar ratios 1.
采用单因素实验、正交实验确定了获得高反应效率的最优条件为:催化剂与醚化剂的摩尔比1。
补充资料：配置效率和生产效率
在经济学上，经济发展的动力，或者说效率的来源，分为两类：一类是配置效率，二是生产效率。所谓配置效率，是指给定资源和技术的条件下，怎么样使资源从边际生产率低的地方流向边际生产率高的地方，从而使得资源和利用更合理、社会总价值达到最大;而生产效率是指如何通过技术进步提高每一种资源的生产率，也就是把社会的生产可行性边界向外移。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条