1) measuring race
测量速度
1.
A multi - chamnel A/D Transfer circuit controlled by a single - chip microcompute was developed, And its characteristics and reacizing method were described in this paper, also, its measuring accuracy and measuring race were cussed.
介绍了一种基于单片机控制的实用多路 Ａ／Ｄ转换电路的特点及实现方法，从测量精度和测量速度二个方面进行了探讨。
2) velocity measurement
速度测量
1.
Realization of depth measurement and velocity measurement with high precision.;
高精度的深度和速度测量方法的实现
2.
Control and velocity measurement of multi-stage reconnection gun;
多级磁力线重接炮的控制与速度测量
3.
The principles and experimental methods of both velocity measurements including the electromagnetic induction,the rotary 2-disc,the Laser-2-Focus Velocimeter,the Laser-Doppler Velocimeter(LDV),the Particle Image Velocimeter(PIV),the impact force measurement and the jet structure measurements including the Scanning-X-Ray Densitometry,the flow separation technique were summarized.
对磨料射流两相速度测量和射流结构测量两方面的进展进行了综述。
3) speed measurement
速度测量
1.
Simplified computational method of high-accuracy speed measurement based on low resolution encoder;
基于低分辨力编码器的高精度速度测量简化算法
2.
Study on digital speed measurement methods for servo control system of swivel table;
转台伺服控制系统中数字化速度测量方法的研究
3.
This system band together tramcar speed measurement, over-speed alarm and the conservation, display and management of record data.
矿车速度测量记录系统的研制，可以有效地解决井下矿车速度难以监控的问题。
4) speed measuring
速度测量
1.
A speed measuring system of moving mirror for Fourier transform spectrometer(FTS) based on FPGA is introduced.
介绍了一种基于FPGA的傅里叶变换光谱仪动镜速度测量系统。
2.
Secondly , the article also introduces the speed measuring circuit based on 555 and the application of it on the diesel.
介绍了速度(频率)/电压转换芯片LM2907/LM2917的工作原理、技术参数和应用电路,并介绍了基于555的速度测量电路和在柴油机测速上的应用。
5) Acceleration measurement
加速度测量
1.
The study of active vibration control of flexible space intelligent truss structures with acceleration measurements is of importance since accelerometers are widespreadly used because of their wide frequency band and light weight.
加速度传感器具有频带宽、结构简单、重量轻等优点而获得了广泛使用 ,因此研究基于加速度测量的结构控制系统具有较大的实用价值。
2.
Dual-accelerometer filtering measurement method is used to eliminate axial acceleration measurement errors caused by accelerometer location,installation errors and attitude motion of projectiles.
弹丸的射程预测通常需要采用加速度计测量其轴向加速度,为了消除加速度计安装位置、安装误差以及弹丸姿态运动对弹丸轴向加速度测量精度的影响,文中基于刚体弹道模型对双加速度计滤波法测量精度进行了仿真分析。
3.
The sensor is also an ideal sensor that can be used in acceleration measurement of other bodies in long displacement rigid body movement.
本文的目的是提出一种强冲击刚体运动加速度传感器,以解决火炮尤其是大口径火炮后坐部分后坐刚体运动加速度测量,消除传统测量方法测量信号中出现的结构应力波或弹性波干扰现象。
6) angular velocity measurement
角速度测量
1.
An angular velocity measurement system was developed to avoid the synchronization problems in the token method.
为了解决以往表征法模型中存在的边缘检测同步性问题,参考昆虫视觉中利用相邻小眼信号提取边缘运动的原理,提出了一种角速度测量系统。
补充资料：天体视向速度测量
| 天体视向速度测量 determination of astronomical radial velocity 天体相对于日心处的观测者的空间速度沿着视线方向的分量称为视向速度。按照多普勒原理，运动的光源发出的某一谱线的波长λ不同于光源静止时发出的同一谱线的波长λ0，其差值Δλ＝λ－λ0取决于光源相对于观测者的视向速度v。两者的关系为：v＝cΔλ／λ0，式中c为光速。如果λ＞λ0，运动光源发出的光向红端移动，视向速度为正，光源远离观测者 ；反之，如果λ＜λ0，运动光源发出的光向紫端移动，视向速度为负，光源接近观测者。只要拍得天体的光谱，测出谱线的波长，就可标出天体的视向速度。由于观测者实际上是在地面上进行观测，而非日心，因此，实际测量得到的视向速度值还需做一些改正，消除地球绕日公转、地球绕地月系中心的旋转和地球自转的影响。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条