1) trolley mechanism
小车变幅机构
1.
Rigid body dynamic modeling of trolley mechanism of tower crane is completed and the operation simulation is performed with Simulink simulation software.
就塔式起重机小车变幅机构的运行建立刚体动力学模型 ,利用Simulink动态仿真工具 ,采用四阶龙格一库塔法对小车变幅机构的运行工况进行仿真 ,并对仿真成果进行了分析。
2) derricking mechanism
变幅机构
1.
GA-based optimal design for derricking mechanism of bucket stacking-reclaiming machines
基于遗传算法的斗轮堆取料机变幅机构的优化设计
2.
The proposed method applied to the design problem of the compensation of pulley block in derricking mechanism and the result shows t.
介绍了物理规划法的基本原理,将该方法引入到稳健优化设计中,建立了稳健优化设计的物理规划法模型,通过求解补偿滑轮组变幅机构的稳健优化问题,验证了该方法的有效性。
3.
The robust optimization design of four-bar of derricking mechanism was carried out.
针对设计函数为隐函数或高度非线性函数的工程设计优化问题,提出了一种较为实用的、综合运用容差模型和正交试验法的稳健优化方法,并将该方法应用到四连杆变幅机构的优化设计中,结果表明,稳健优化后的变幅机构性能得到了改善,设计质量得到了提高。
3) luffing mechanism
变幅机构
1.
Optimal design of pulley block compensation of luffing mechanism based on design robustness;
基于设计稳健性的补偿滑轮组变幅机构的优化设计
2.
Luffing mechanism applied to AUV launch and recovery method;
用于AUV收放装置的变幅机构研究
3.
Dynamic simulation and optimum design of luffing mechanism of lorry loading crane;
随车起重机变幅机构仿真与优化设计
4) amplitude variation mechanism
变幅机构
1.
The Virtual Prototype model of the amplitude variation mechanism of QY20 truck crane is built by using ADAMS software and the simulation of the working course of the amplitude variation mechanism is done.
以QY20汽车起重机为研究对象,利用ADAMS软件建立了QY20汽车起重机变幅机构的虚拟样机,并对汽车起重机变幅机构的工作过程进行仿真,获得了变幅油缸中变幅力随时间变化的曲线。
2.
Motion and force Analysis on the three pinconnected joints of amplitude variation mechanism of the truck crane are discussed in this paper.
对汽车起重机变幅机构三铰点进行了运动分析和受力分析,合理确定了变幅机构三铰点的位置,得出起重特性曲线,并给出了三铰点各结构参数的调整方法。
3.
To make a study of QY20 truck crane,the virtual prototype model of the amplitude variation mechanism of truck crane is built by using ADAMS software,and the simulation of the working course of the amplitude variation mechanism is done.
以QY20汽车起重机为研究对象,利用ADAMS软件建立其变幅机构的虚拟样机,并对变幅机构的工作过程进行仿真,获得了变幅油缸中变幅力随时间变化的曲线。
5) vehicle driver
小车机构
1.
According to the working principle of the stacker and design requirements of the vehicle system,a parameterized virtual model is built for design automation of the vehicle driver based on ADAMS.
根据型钢堆垛机的工作原理和对小车机构的设计要求,基于ADAMS软件建立小车机构的虚拟样机参数化模型,提出了小车机构的运动学仿真策略,可高效地完成小车机构的设计综合。
6) thread guide mechanism with variable stroke
变幅导丝机构
补充资料：国有金融机构监事会的定期接受国有金融机构报告的职权
国有金融机构监事会的定期接受国有金融机构报告的职权：国有金融机构应当定期、如实向监事会报送财务报告、资金营运报告，并及时报告重大业务经营活动情况，不得拒绝、隐匿、伪报。―――――《国有重点金融机构监事会暂行条例》第13条
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条