说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 无损磁测
1)  nondestructive magnetism
无损磁测
1.
We have studied the results of nondestructive magnetism of residual stress with the effects of boundary.
对边界的存在对残余应力无损磁测法测量结果的影响作了仔细地研究 ,进行了边界效应影响的理论推导 ,得出了修正测量数据的依据 ,并在此基础上 ,讨论了探头测距对测量精度的影响 ,找到了一种提高测量精度的新方
2)  Nondestructive detection with magnetic flux leakage
漏磁无损检测
3)  ENDT
电磁无损检测
1.
Study of the Method of Steel and Iron ENDT Based on Digital Signal Progressing;
基于数字信号处理的钢铁电磁无损检测方法研究
2.
Study of the ENDT Technique Based on DSP;
基于DSP的电磁无损检测技术
3.
Application of Fuzzy ISODATA Algorithm in ENDT;
模糊ISODATA算法在电磁无损检测应用中的研究
4)  electromagnetic nondestructive testing
电磁无损检测
1.
Design of electromagnetic nondestructive testing circuit for steel materials crack based on RAM
基于ARM的钢铁材料裂纹电磁无损检测电路设计
2.
The testing principle of the new type of electromagnetic nondestructive testing instrument based on the principle of inital magnetic permeability was described.
简述了基于初始磁导率法的新型电磁无损检测仪的检测原理,用该仪器进行了测试, 测得40Cr结构钢的硬度与仪器数显值成单值关系,从而解决了目前国内外各种电磁检测仪的指 示值与结构钢硬度之间成“N”型关系的一大难题。
3.
In this paper, the principle of electromagnetic nondestructive testing for the hardness was described.
本文简述了电磁检测硬度的机理,利用电磁无损检测对钢轨双频淬火后的全长连续接触硬度检测进行测试研究,对钢轨纵向硬度的区分度已达铁道部部标准。
5)  Electromagnetic Non-Destructive Testing
电磁无损检测
1.
Design and Realization of Signal Generator in Electromagnetic Non-Destructive Testing;
电磁无损检测中信号发生器的设计与实现
6)  steel structure
磁性无损检测
1.
A theoretical research on magnetic nondestructive testing of steel structures;
钢结构磁性无损检测理论与应用研究
补充资料:磁电式测振传感器
分子式:
分子量:
CAS号:

性质:机械振动电测法传感器的一种。属绝对式惯性振动传感器。这类传感器的一种结构及其工作原理如图所示,当传感器被固定安装在被测的振动体上并与之一起振动时,通过弹簧片,形成由线圈、阻尼环和芯轴组成的质量块与壳体之间的相对运动,线圈在壳体与磁钢之间的间隙内对磁力线进行了切割,产生感应电动势,并从引出线输出感应电压信号,再经放大器及电压表示波器,显示对应的振动参数值。这种传感器的灵敏度取决于弹簧片的机械强度,并与线圈的高频电感量的精度直接相关。设计制造时,对弹簧片的刚性要求很高,以保证其固有频率保持在一定范围以内,线圈的电感特性也有严格的要求,以保证传感器具有高灵敏度。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条