说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 性能试验对比
1)  experiment characteristics
性能试验对比
2)  mechanics function contrast tests
力学性能对比试验
1.
We can draw a conclusion that the tensile strength,the bending tensile strength and the fatigue performance of the test pieces with anchor-head silk has increased significantly compared with those without anchor-head silk through the mechanics function contrast tests.
通过力学性能对比试验得出结论为:加布锚头丝沥青混凝土小梁的抗拉强度、弯拉强度和疲劳寿命都较普通沥青混凝土小梁有明显提高。
3)  comparative test
对比试验
1.
Comparative Test on New Late Rice Variety in Huichang County in 2006;
2006年会昌县晚稻新品种对比试验
2.
A comparative test of the rectangular V-type curved otter board and V-type curved otter at sea;
矩形V型曲面网板和V型网板生产性对比试验
3.
In accordance with the problems of waste water discharge and lack of clean water,a comparative test is conducted in Shengtuo Oilfield to produce polymer using waste water.
针对油田产出污水外排、清水紧缺的问题,胜坨油田开展了利用油田产出污水配制聚合物的对比试验。
4)  Contrast test
比对试验
1.
The contrast test and management strategy for glucose monitoring meters;
血糖仪的比对试验及其管理对策研究
2.
Before use,contrast test and bias evaluation ought to be carried out so as to determine whether the results of other instruments were in the allowable range compared with the reference method,and to calibrate into uniformity.
在使用之前,需要先进行仪器之间的比对试验及偏差评估,以确定相对于参考方法而言,其他仪器结果是否在允许范围内,并进行校正以便统一。
5)  experiment contrast
试验比对
1.
Then,the basic reasons of causing system errors are found out by the experiment contrast.
对油田企业分区块计量问题的现状进行了分析,指出了目前存在计量误差的主要原因,针对费希尔Ex8300质量流量计在使用中存在的缺陷,重新引进了新型CMF纯油质量流量计,报告了在多个原油集输站的试验情况,通过试验比对,找出了产生系统误差的根本原因,提出了在分队、分区块计量中质量流量计的应用是可行的,并告戒仪表管理人员对质量流量计的输入参数的动态变化要进行适时调整,以保证仪表的计量准确。
6)  comparison test
对比试验
1.
We found the low efficiency of the self-made motor through a comparison test and learned the reasons by theory analysis.
通过对比试验,发现自制马达效率低。
2.
The comparison tests between the phpsphating solution of "4 in 1" composed of aluminium salt and that of zinc salt were also made.
探索以铝盐为磷化主剂,兼有除油除锈防锈功效的磷化液,简述了该磷化液成份的作用,进行了金属材料的浸泡试验,测试了磷化膜的防锈性和耐蚀性,并对铝盐和锌盐为主剂配制的“四合一”磷化液作了对比试验,从而提示了铝盐作为磷化主剂的优越性。
3.
Through comparison testing of the surface of reflowing holes of the external-mix self-sucking pump, the best design is determined.
对外混式自吸泵的回流孔面积进行对比试验,确定最佳设计方案。
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条