1) Modified rotational stiffness
修正转动刚度
3) Rotational stiffness
转动刚度
1.
The characteristics and influencing factor on the bearing capacity,rotational stiffness and ultimate rotatability of steel frames with different semirigid joints are discussed,based on the experimental result.
通过对4种不同形式和构造的轻钢框架梁柱连接节点试验研究,分析了端板厚度、T型钢厚度、柱腹板加劲肋等因素对半刚性节点承载力、转动刚度和极限转动能力的影响。
2.
It has been verified by the relevant tests results that this method can calculate the integral rotational behavior of end-plate connections including the initial rotational stiffness and the moment-rotation(M-φ)curve accurately.
提出了一种计算钢结构梁柱半刚性端板连接转动变形的方法,通过与试验结果比较得到验证,该方法不但能够很好地计算端板连接的整体转动变形特性,包括初始转动刚度和弯矩-转角(M-φ)全过程曲线,而且能够较好分析计算其转动变形的各种来源,包括节点域剪切变形、螺栓伸长、端板和柱翼缘弯曲变形等,从而能够提供弯矩-剪切转角(M-φs)和弯矩-缝隙转角(M-φep)曲线,为准确分析端板连接的细部转动变形特性提供了可靠依据,同时也为我国钢结构设计规范关于节点转动变形的具体设计计算方法提供了有益补充。
3.
Based on theory of mechanics and calculus,deduces the expression for calculating the rotational stiffness and coefficient of cosh-flexure hinge.
以力学公式和微积分为基础,推导出了双曲余弦柔性铰链的转动刚度及其系数表达式。
4) rotation stiffness
转动刚度
1.
The paper introduces an idea that taking a multi - span continuous beam as a distribution element joins in the moment distribution method, and recurrence formula which the bar - end rotation stiffness of arbitrary -span continuous beam and carry - over coefficient of joint moment is derived, so the idea can be put in practice.
提出以多跨连续梁为单元参与力矩分配法的设想,导出了任意跨连续梁的杆端转动刚度和结点处弯矩传递系数的递推计算式,使得设想能够实施。
2.
A formula for the rotation stiffness of MDOF model is proposed in the paper.
本文提出了考虑橡胶隔震支座剪切变形状态下竖向刚度特性的转动刚度计算式,并应用到大高宽比塔型隔震结构体系多质点体系计算模型分析隔震结构的地震反应。
5) rotational correction
转动修正
1.
A general formula for the rotational correction of Brillouin scattering tensor is derived based on the coordinate transformation.
从坐标变换出发，导出了布里渊散射张量转动修正的简洁表达式。
6) modified reduced stiffness method
修正折减刚度
补充资料：JPZ型三向等刚度橡胶减震器
分子式：
CAS号：
性质：JPZ-type tridirective equal rigid rubber mounting 橡胶减震器的一种。具有x、y、z三个方向等刚度、等自震频率。按负荷大小可分为JPZ-1、JPZ-2两种型号。由中央金属芯柱、伞形金属罩及橡胶连接而成，模压法生产。可满足导弹控制仪等设备的隔震和抗冲击要求。
CAS号：
性质：JPZ-type tridirective equal rigid rubber mounting 橡胶减震器的一种。具有x、y、z三个方向等刚度、等自震频率。按负荷大小可分为JPZ-1、JPZ-2两种型号。由中央金属芯柱、伞形金属罩及橡胶连接而成，模压法生产。可满足导弹控制仪等设备的隔震和抗冲击要求。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条