1) Latex layer
橡胶垫层
2) cushion rubber
垫层橡胶
3) sandwich rubber cushion
夹层橡胶垫
1.
Shantou Museum, with designed seismic resistance grade 8, was built in July 1995, and sandwich rubber cushions were used for seismic insulation.
汕头博物馆于1995年7月兴建,按8度抗震设计,采用夹层橡胶垫建筑隔震技术,具有明显的优越性:理论上能确保建筑物在地震中的安全,设计减震机理明确;有一定的耐久性;节省造价,构造简单,制作、施工、安装方便。
4) laminated rubber bearing
夹层橡胶垫
1.
In this paper,the seismic isolation technique is used in seismic-releasing of the single-storey industrial building by use of laminated rubber bearing as link member between roof and column.
结合单层工业厂房的构造特点,将夹层橡胶垫隔震技术引入到单层工业厂房的设计中,并探讨了橡胶垫的减震效果和减震机理。
5) laminated rubber bearing
叠层橡胶垫
1.
In this paper a new isolation system,which combines shape memory alloy(SMA) damper and laminated rubber bearing,is proposed to obtain preferable isolation characteristics and re-centering capacity.
为了使隔震结构体系能够同时获得良好的隔震特性及震后自复位能力,本文利用形状记忆合金(SMA)材料在相变伪弹性阶段具有较好阻尼性能这一特点,采用SMA自复位阻尼器与常规叠层橡胶垫组合成自复位隔震装置。
2.
In this paper, a shape memory alloy (SMA) re-centring damper is developed by using pseudo-elasticity property of SMA, and a new isolation device combining the above damper with laminated rubber bearing is proposed, the application of which enables the isolation system to provide preferable isolation character and re-centring capacity.
为了使隔震结构体系能够同时获得良好的隔震特性及震后自复位能力,利用形状记忆合金(SMA)材料的相变伪弹性性能,研制了一种SMA自复位隔震阻尼器,并将其与叠层橡胶垫联合应用,提出了一种新的自复位隔震装置。
3.
In this paper,a shape memory alloy (SMA) re-centring damper is developed to utilize the pseudo- elasticity property of SMA,and a new isolation device combining the above damper with laminated rubber bearing is proposed,applying which the isolation system can be provided with preferable isolation character and re-centring capacity.
为了使隔震结构体系能够同时获得良好的隔震特性及震后自复位能力,本文将形状记忆合金 RCD 阻尼器与叠层橡胶垫联合应用,提出了一种新的自复位隔震装置。
6) mezzanine rubber cushion
夹层橡胶垫
1.
Loding on energy dissipating low-rise concrete shear wall with mezzanine rubber cushion;
夹层橡胶垫耗能低剪力墙承载力分析
2.
Behavior analysis of energy dissipated low-rise concrete shear wall with mezzanine rubber cushion by ANSYS;
应用ANSYS对夹层橡胶垫耗能低剪力墙结构的性能分析
补充资料：橡胶模具、橡胶压模、橡胶硫化模
分子式：
CAS号：
性质：又称橡胶模具、橡胶压模、橡胶硫化模。用于压制橡胶产品的金属模型。一般用钢材(如45号钢)按图纸要求经机械加工而制得，并经热处理以提高其硬度及耐磨性。模具型腔与产品结构相同，型腔尺寸必须考虑不同橡胶的收缩率，在产品尺寸基础上进行放大或缩小，方可得到合适的产品尺寸。模具从工艺操作考虑还要设置流胶槽、启模口、定位销等。
CAS号：
性质：又称橡胶模具、橡胶压模、橡胶硫化模。用于压制橡胶产品的金属模型。一般用钢材(如45号钢)按图纸要求经机械加工而制得，并经热处理以提高其硬度及耐磨性。模具型腔与产品结构相同，型腔尺寸必须考虑不同橡胶的收缩率，在产品尺寸基础上进行放大或缩小，方可得到合适的产品尺寸。模具从工艺操作考虑还要设置流胶槽、启模口、定位销等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条