1) external gearing cylindrical gear
外啮合直齿轮
1.
In this paper, main factors affecting the volumetric efficiency of external gearing cylindrical gear pump are analyzed, mechanism of hole produced in tooth space of pump and mechanism of leak loss by clearance are discussed.
分析了影响外啮合直齿轮机油泵容积效率的主要因素 ,对油泵齿谷产生空穴和间隙漏损的机理进行了探讨。
3) External gear pump
外啮合齿轮泵
1.
Calculation of dynamic torque acted on external gear pump considering relief groove and trapped oil pressure
考虑困油和卸荷的外啮合齿轮泵动态转矩计算
2.
It is the micro-external gear pump that the key component of the system, which the speed may reach 3,700 Rpm, the instantaneous pressure may reach 35 MPa as well as the addendum circle diameter only has 14 mm.
系统中的心脏和动力源就是微型外啮合齿轮泵,它的转速可达3700 Rpm,瞬时工作压力可达35 MPa,其中齿轮的齿顶圆直径只有14 mm,同时它也是影响该系统合格率的重要部件之一。
4) outer-engaged gear pump
外啮合齿轮泵
1.
Cause and solution for noise from outer-engaged gear pump;
外啮合齿轮泵产生噪声的原因探究及解决方法
2.
Calculation of the geometric size of the modified gear, analysis of the flow characteristics of the outer-engaged gear pump, leakage and gap, radial force are discussed in this paper.
外啮合齿轮泵具有结构简单、体积小、重量轻、自吸性能好、对油液污染不敏感、工作可靠、寿命长、成本低和维修方便等众多优点,故在各种液压机械中得到了广泛应用。
5) external gear pump;gear on gear pump
外啮合齿轮泵<液>
6) gear mesh
齿轮啮合
1.
An exact dynamic simulation of the gear mesh has come ture based on the advantage of Pro/E and ADAMS,taking the standard involute right tooth columnar gear as an example.
将Pro/E三维建模软件和ADAMS动力学仿真软件相结合,以标准渐开线直齿圆柱齿轮为例,进行了齿轮啮合的精确动力学仿真。
2.
Comparison is made between the three kinds of bearing arrangement modes in bearing life and gear mesh.
从轴承寿命和齿轮啮合2个方面对3种布置方式进行比较。
补充资料：外啮合齿轮泵
分子式：
CAS号：
性质：一种齿轮泵。由两个外齿轮啮合而输送液体。结构简单、重量轻、造价低、工作可靠、应用范围广。
CAS号：
性质：一种齿轮泵。由两个外齿轮啮合而输送液体。结构简单、重量轻、造价低、工作可靠、应用范围广。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条