1) heating in advance
提前供暖
1.
Discusses the fresh air rate, terminal equipment functions, heating in advance, and cold / heat sources for air-conditioning designing in morden hospitals.
探讨了现代化医院空调设计中的新风量取值标准、末端设备的选择、提前供暖与空调冷热源等问题。
2) quality of heat supply
提高供暖质量
1.
Reconstruction suggestions are proposed to fulfill the targets of increasing the quality of heat supply and of decreasing the energy consumption.
分析了某化工厂余热供暖系统运行存在供热量不足、电力消耗严重的问题 ,提出具体改造意见 ,达到提高供暖质量、降低能耗的目的。
3) fuel supply advance angle
供油提前角
1.
Effect of fuel supply advance angle on combustion characteristics of LPG/diesel blended fuel engine;
供油提前角对LPG/柴油混合燃料发动机的影响
2.
Effect of fuel supply advance angle on combustion and emission of diesel engine with diesel/coal water slurry blend fuel;
供油提前角对柴油/水煤浆混合燃料燃烧排放性能的影响
3.
Influence of fuel supply advance angle on fuel economy of diesel engine with ethanol-diesel blend fuel;
柴油机供油提前角对乙醇/柴油混合燃料经济性的影响
4) injection timing
供油提前角
1.
This paper also specifically analyzes the effects of compression ratio and injection timing on performance of the 4100 direct injection diesel engine, and then confirmed appropriate compression ratio .
还具体分析了压缩比和供油提前角等主要参数对整机性能的影响,确定了合理的压缩比和供油提前角。
2.
This paper also specifically analyzes the effects of compression ratio and injection timing on performance of the 4100 direct injection diesel engine, and then confirmed appropriate compression ratio and injec.
具体分析了压缩比和供油提前角等主要参数对整机性能的影响,确定了合理的压缩比和供油提前角。
3.
Based on the demand of precision in injection timing control, BP neural networks structure is established and several groups of experimental data are used as the training sample, an injection timing MAP is concluded.
根据供油提前角控制精度的要求,确定了BP神经网络结构,选取不同实验数据为训练样本,获取了供油提前角脉谱;引入随机误差合成方法,以模型的计算总误差为指标,讨论了满足控制精度要求的样本数范围和最少样本数,并进行了由最少样本数获取最佳供油提前角实验,验证了具有最佳供油提前角的柴油机,其性能指标最优。
5) Fuel delivery advance angle
供油提前角
1.
Fuel delivery advance angle is one of the valid parameters in monitoring the state or in diagnosing the fault of diesel engine.
供油提前角是监测柴油机技术状况变化或检测其故障的有效参数之一,因此研究快速、准确地检测供油提前角的方法是有重要意义的。
2.
Effects of fischer-tropsch (F-T) diesel fuel on the combustion and emission characteristics of a single-cylinder direct injection diesel engine under different fuel delivery advance angles were investigated.
在两种不同供油提前角下研究了燃用F-T柴油对直喷式柴油机燃烧和排放特性的影响,结果表明:发动机不做任何调整时,与0号柴油相比,燃用F-T柴油的滞燃期较短,预混燃烧放热峰值较低,扩散燃烧放热峰值较高,最高燃烧压力和最大压力升高率较低,燃油消耗率和热效率都得到了改善,HC、CO、NOx和碳烟排放同时降低。
3.
On the basis of looking up domestic and foreign literatures and consulting the facts of repairing factory, with 495T diesel engine machine as the study object and the fuel delivery advance angle as the study factor, this thesis has probed into the effect of the deviation of fuel delivery advance angle in each cylinder on exhaust and other performance of engine.
本文在查阅国内外文献及参考修理厂实际情况的基础上，以修理后的495T直喷式柴油机为研究对象，以供油提前角为研究因素，探讨发动机各缸的供油提前角偏差情况对排放及其它性能的影响。
6) supply leadtime
供应提前期
1.
A cost sharing model in ATO supply chain was structured,with the varieties of the component s supply leadtime and lot sizes.
以由一个零部件供应商和一个产品组装制造商组成的ATO两级供应链为对象,研究零部件供应商和组装产品制造商共同投资缩短零部件供应提前期以缩短产品交货期的相关模型。
补充资料：供暖
又称“采暖”。用人工方法保持室内一定温度(一般在20°c上下)的技术。分两种：(1)集中供暖。由热源集中制备的热水或蒸汽，通过管道输送到各房间内的散热设备，将热量散发；或将空气集中加热后用风管分送到各个房间。(2)就地(局部)供暖。设在室内的火炉、电炉、空调器等就地产生和散发热量。也有用火墙、火炕供暖的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条